نمایش چکیده فارسی

Design and construction of nanoscale material for ultrasonic assisted adsorption of dyes: Application of derivative spectrophotometry and experimental design methodology

Ramin jannesar1 Misam ahmadzadeh2 Amir hajian3 Fahimeh Zare4 Vahid pezeshkpour5

Abstract :
Response surface methodology (RSM) based on central rotatable experimental design was used to investigate the effect of ultrasound assisted simultaneous adsorption process variables on Cu: ZnS-NPs-AC from aqueous solution. Cu: ZnS-NPs-AC was characterized using field emission scanning electron microscopy (FE-SEM), Energy Dispersive X-Ray Spectroscopy (EDX) and X-ray diffraction (XRD). To overcome the severe methylene blue (MB) and brilliant green (BG) dyes spectral overlapping, derivative spectrophotometric method were successfully applied for the simultaneous determination of dyes in their binary solutions. Simultaneous determination of the dyes can be carried out using the first- order and second order derivative signal at 664 and 663 nm for BG and MB, respectively. The factors investigated were pH (2.5-8.5), adsorbent mass (0.006-0.030 g), sonication time (1-5 min) and initial MB and BG concentration (3-15 mg L-1). Five levels, which were low level, center point, upper level and two axillar points, were considered for each of the factors. The desirability function (DF: 0.9853) on the STATISTICA version 10.0 software showed that the optimum removal (99.832 and 99.423% for MB and BG, respectively) was obtained at pH 8.0, adsorbent mass 0.024 g, sonication time 4 min and 9 mg L-1 initial concentration for each dye. Besides, the results show that obtained data were adequately fitted into the second-order polynomial model, since the calculated model F value (172.96 and 96.35 for MB and BG, respectively) is higher than the critical F value. The values of coefficient of determination (0.9968 and 0.9943 for MB and BG, respectively) and adjusted coefficient of determination (0.9911 and 0.9840 for MB and BG, respectively) are close to 1, indicating a high correlation between the observed and the predicted values.The ultrasonic amplitude and adsorbent mass were found to be the most effective variable influencing the adsorption process. The adsorption equilibrium was well described by the Langmuir isotherm model with maximum adsorption capacity of 185.2 and 151.5 mg g-1 for MB and BG respectively on adsorbent. The results indicate that pseudo-second-order kinetic equation and intra-particle diffusion model can better describe the adsorption kinetics.

Keywords : brilliant green central composite design cu zns npsac kinetics and isotherm study methylene blue ultrasonic assisted adsorption


زبان مقاله : انگلیسی
محور مقاله : شـیمـی
محل انتشار : پنجمین دوره کنفرانس بین المللی پژوهش در علوم و تکنولوژی
آدرس وب سایت کنفرانس : 5rstconf.com
کد IOI مقاله : XYFE-BBEFZ
لینک مستقیم مقاله : https://isnac.ir/XYFE-BBEFZ
نمایش چکیده فارسی : https://isnac.ir/SA/XYFE-BBEFZ

سایر مقالات ارائه دهنده
  1. Comparative study based on micro-dilution and plate count method for synergism antibacterial effect of MOF-5 nanoparticles and Broccoli extract Against Pseudomonas aeruginosa
  2. Antibacterial effect of Metal organic framework-3 and extract of Biarum bovei on standard and clinical strains of methicillin resistant Staphylococcus aureus (MRSA)
  3. Inhibitory effects of broccoli extract and Metal organic framework-5 and on standard and clinical strains of Pseudomonas aeruginosa
  4. Antibacterial and Antifungal activity of Flower Extracts of Urtica dioica, Chamaemelum nobile and Salvia officinalis: Effects Of Zn [OH]2 Nanoparticles and Hp-2-minh on their property
  5. تعیین فراوانی عوامل باکتریال در عفونت ادراري و الگوي آنتی بیوتیکی نمونه هاي ارسال شده به آزمایشگاه دنا یاسوج طی سالهاي :1393-1394 یک گزارش کوتاه
  6. Application of switchable polarity solvents for the preconcentration and quantification of phenethyl glucosinolate in broccoli (antioxidant activity, total phenolics content and antimicrobial study)
  7. Design and construction of nanoscale material for ultrasonic assisted adsorption of dyes: Application of derivative spectrophotometry and experimental design methodology
  8. Simultaneous removal of Cd(II), Ni(II), Pb(II) and Cu(II) ions via their complexation with HBANSA based on a combined ultrasound-assisted and cloud point adsorption method using CSG-BiPO4/FePO4 as novel adsorbent: FAAS detection and optimization process
سایر مقالات محل انتشار
  1. نقش زون گسله منطقه خضرآباد یزد در ایجاد حرکت¬های توده¬ای
  2. نظرکاوی در متن های فارسی به کمک سیستم استنتاج فازی
  3. Evaluating of an English Language Teaching Program at High School in Iran
  4. بررسی رابطه آموزش به شیوه قصه گویی بر میزان هوش کلامی و گنجینه لغات کودکان پیش دبستانی
  5. اصول طراحی در پایداری خانه ایرانی (نمونه موردی: خانه عباسیان کاشان)
  6. نقش آموزش دیجیتال درخلاقیت دانشجویان معماری
  7. عليت از نظر هيوم و مطهري
  8. Metadiscourse in Academic writing: Does it really help ESP students to write effective Research Articles
  9. تخریب میراث تاریخی یک شهر ، تخریب هویت ساکنین شهر
  10. The study of data mining issue in the medical field
  11. Technical and Economic Evaluation of Water and Immiscible Gas Methods to Increase Oil Recovery from One of Iranian Offshore Oil Fields
  12. بررسی رابطه بین نگرش مذهبی با میران پرخاشگری در کارکنان اجرایی شهرستان خاش
  13. بررسی رسوب گذاری و خوردگی در سیستم آبرسانی
  14. Fraud Detection in Banking Using KNN (K-Nearest Neighbor) Algorithm
  15. اثر نانولوله کربنی و استایرن بوتادین استایرن بر مقاومت و سختی قیر