نمایش چکیده فارسی

Subseafloor engineering geology of Iranian oil and gas fields in Persian Gulf

Maryam Fattahi Bandpey1 Naser Hafezi Moghaddas2 Mohammad Ghafoori3 Reza Moussavi Harami4 Sadjad Kazem Shiroodi5

Abstract :
Geological and geotechnical conditions of the seabed and sub seabed are one of the important and necessary information for design and operation of offshore structures. The geological study discussed the history of sedimentation on the site and geological substitution process that affects the deposits. This data could be used for construction an engineering geology model that show the spatial uniformity of seabed properties across the region. In this research, geological engineering conditions of sub seabed in Iranian part of Persian Gulf, that includes many oil and gas fields and marine structures, have investigated. The depth of study have limited to about 100 meters below seabed. For this, existing geothechnical data of study area were gathered and a suitable geotechnical database have provided. Then the geological sections of the study area have prepared. Results indicated that abundance of interbeded and lenses of coarse grain layers near Iranian coastline, are more than another parts of the study area. Also the frequency and thickness of coarse layers increased from Iranian part towards Arabian part. Based on the engineering properties data and interpreting plotted graphs, in general three horizon can be separated. Horizon a. includes alternating of fine and coarse layers. The engineering properties of this horizon is very varied toward the coastal line. This horizon is loose and inhomogeneous and comprises many lenses and interlayers of coarse grain sediments. The second horizon are more compacted and more strength but still shows the high heterogeneity. The third layers includes of hard limy clay and compacted calcareous sand that are relatively homogeneous.

Keywords : marine geology engineering geology shallow sedimentology offshore geotechnics persian gulf


زبان مقاله : انگلیسی
محور مقاله : زمین شناسی دریایی
محل انتشار : دومین همایش بین المللی اقیانوس شناسی غرب آسیا
آدرس وب سایت کنفرانس : rcowa.ir
کد IOI مقاله : XADE-BKFHC
لینک مستقیم مقاله : https://isnac.ir/XADE-BKFHC
نمایش چکیده فارسی : https://isnac.ir/SA/XADE-BKFHC

سایر مقالات محل انتشار
  1. تأثیر پلی ساکارید سولفاته استخراج شده از Ulva intestinalis بر پاسخ ایمنی ماهی قزل‌آلای رنگین کمان Oncorhynchus mykiss
  2. بررسی سرعت جریان آب در خلیج گرگان تحت تاثیر الگوی باد متغیربا استفاده از مایک21
  3. Numerical modeling of barotropic response to Shamal wind in the Persian Gulf
  4. Subseafloor engineering geology of Iranian oil and gas fields in Persian Gulf
  5. استفاده از داده های اقیانوسی به منظور مدلسازی توزیع گونه ای جنگل های مانگرو در ایران
  6. مطالعه الگوی تحرک‌پذیری کانال‌های جریان‌ برگشتی ناشی از هجوم امواج عمود بر ساحل
  7. بررسی چرخه زندگی گونه Akashiwo sanguinea(Dinophyceae) جدا شده از رسوبات سواحل خلیج چابهار با پتانسیل تشکیل بلوم جلبکی مضر
  8. تعیین کمیت میکروپلاستیک‏ها در بافت نرم تنان Thais mutabilisو Cerithidea cingulateبندر انگور، سواحل قشم
  9. بررسی ارتباط شاخص¬های مختلف انسو با دما ایستگاه سینوپتیک چابهار
  10. مطالعه ی مقایسه ای ساختار بافتی کلیه در خانواده های غالب ماهیان شمال غرب خلیج فارس
  11. راستی آزمایی منطقه ای بادهای شدید و طوفان در استان اصفهان با طرحواره های فیزیکی وگام های مکانی مختلف
  12. مطالعه اثر جریان خروجی یک پلوم در محیط چینه‌بندی شده بر روی پراكندگي صوت در آزمایشگاه
  13. Toxic dinoflagellate resting cysts distribution in the surface sediments of the northeast of the persian gulf in ralation with environmental parameters and their role in bloom formation
  14. تفاوت در نوع جلبک همزیست با 3 گونه مرجان سخت در جزیره قشم: شاهدی بر پایداری همزیستی در برخی کمپلکسهای مرجان-زوگزانتلا
  15. بررسی آلودگی میکروپلاستیک در رسوبات ساحل بندر ترکمن