نمایش چکیده فارسی

Failure behavior of soil slopes stabilized by urease enzyme at different angles

Reza Yousefi1 Amir Abbas Amooei2 Mohammad Sajjad Soltani3

Abstract :
In evaluating the stability of soil slopes, its stability analysis plays a decisive role. Generally, to prevent slope instability or the design of a stable slope, there are three ways to move the layout of the plot, reduce the thrust forces, and enhance the slip forces to avoid the risk of slipping. Since the criterion of slope instability is the equilibrium of thrust force and resistance, weight loss of the slippery slope will decrease the thrust forces and thus increase the factor of safety in displacement. Nowadays biologically and environmentally friendly methods are used as a subset of environmental geotechnics for soil stabilization. One of these methods is using urease enzyme for hydrolyzing urea and formation of calcium carbonate precipitation in soil pores, which results in increment of soil strength and cohesion. Therefore, many studies have been carried out to identify the behavior of soils improved with this method, but limited modeling has been done on the real issues of stabilization. In this study, the effect of calcite precipitation in sandy soil was investigated by using direct shear test and modeling the results by limit equilibrium analysis method in two states, one in presence of groundwater and the other without considering it. In the limit equilibrium method, the probability of rock or soil mass slip due to gravity is investigated. The results show that in this method, soil stabilization has increased the stability factor of safety. The effect of slope angle on the stability of the slope stabilized by urease enzyme was also investigated. The modeling results showed that with increasing soil slope angle, slope stability decreased.Also the stability factor of safety in unsaturated state was higher than saturated state.

Keywords : soil slope factor of safety limit equilibrium method (lem) slope angle sand urease enzyme


زبان مقاله : انگلیسی
محور مقاله : علوم مهندسی
محل انتشار : کنفرانس بین المللی روند های نو در مهندسی، علوم و تکنولوژی
آدرس وب سایت کنفرانس : etest2020.com
کد IOI مقاله : XCZC-ECCKK
لینک مستقیم مقاله : https://isnac.ir/XCZC-ECCKK
نمایش چکیده فارسی : https://isnac.ir/SA/XCZC-ECCKK

سایر مقالات محل انتشار
  1. بررسی پارامترهای ادراکی و کالبدی در طراحی مجتمع تجاری موفق
  2. بررسی و اولویت بندی عوامل تاخیر در پروژههای عمرانی به روش سلسله مراتبی، طبق استاندارمدیریت پروژه
  3. بیان هویت در معماری معاصر ایران با تاکید بر اصل نیارش
  4. دسترسی چندگانه تقسیم کدی بیش بارگذاری شده توسعه یافته برای شبکه روی تراشه
  5. سنتز گرافن اکسید حامل ایندول به عنوان یک نانودارو
  6. سنتز گرافن اکساید از گرافیت به روش‌هامر بهینه شده با هدف نشاندن داروی ایندول بر روی آن
  7. بررسی نظام مدیریت و برنامه ریزی شهری و منطقه ای در کشور انگلستان
  8. بررسی و تحلیل ارتعاشی مودال فنر لول و فنر تخت با استفاده از نرم افزار آباکوس
  9. عوامل تاثیرگذار بر تصمیم خرید مصرف کنندگان در خریدهای الکترونیک (مطالعه ای در استان آذربایجان شرقی)
  10. بررسی اثرات چینش لایه ها بر عمرکارکردی چندلایه کامپوزیتی تحت بارگذاری خستگی
  11. روند عملیات ژئوتکنیک در پی سد مشمپا جهت آماده سازی عملیات خاکریزی
  12. تاثیر افزودن دکستروز، پودرچربی، اسید نیکوتینیک(نیاسین)، کولین کلراید، بیوتین، متیونین و مخمر بر تولید شیر و ماده خشک مصرفی در گاوهای هلشتاین در دوره انتقال
  13. تاثیر افزودن مخمر بر گاوهای هلشتاین در دوره انتقال(مروری)
  14. تناسب سنجی واحدهای اراضی برای زون بندی مناطق تحت حفاظت
  15. تاثیر TMD بر تحلیل خطی قاب خمشی بتن آرمه ی ویژه مطابق استاندارد 2800 ایران