تصفيه پذيري و بهبود تجزيه بيولوژيكي فاضلاب حاوي سيال برشكاري با فرآيند فنتون و شبه فنتون

وحيد آقابالايي1 مجتبي فاضلي2 عباس شويدي3

چکیده :
Abstract The Metalworking or cutting fluids (MWCFs) used as a coolant and lubrication in by different metal working operations and machinery processes. Treatment of this kind of wastewater imposes an excessive cost on metalworking industries. The worldwide usage is estimated about 3.8–7.6 million m3 of oily wastewater results annually from the use of MWCFs. Fenton and Fenton-like processes is applied for the treatment of MWCFs characterized by high COD concentration and non-biodegradability. Affecting the processes, such as pH, dosages of Fe2+ (and Fe3+) and H2O2, the contact time, mixing speed were determined by Jar-test experiment, also according to dual functions of oxidation and coagulation in Fenton process, the sludge production rate and sludge settling velocity were determined in a graduated cylinder. The results of study showed the optimum conditions, the amount of COD removal was 88.31% in Fenton Process under pH 3, 50 g/l H2O2, 10 g/l Fe2+ and 60 min settling time, and 73.97% in Fenton-like Process under pH 5, 100 g/l H2O2, 10 g/l Fecl3 and 30 min settling time. Also, during the first 15 min of the Fenton’s reaction, more than 92% of COD removal could be achieved. The efficiency of the Fenton-like process was less than Fenton processes. The Fenton process, when increasing the dosages of Fe2+ from 5 to 40 g/l, the sludge production rate increasing from 55 to 580 ml/l but also increasing sludge settling velocity. After all processes, the biodegradability (BOD5/COD ratio) of the treated MWCFs was increased compared to that of the raw MWCFs and the highest increase in BOD5/COD ratio was observed in the Fenton process.

کلمات کلیدی : سيال برشكاري تصفيه فاضلاب معرف فنتون اكسيداسيون راديكال هيدروكسيل


زبان مقاله : فارسی
محور مقاله : بخش محیط زیست طبیعی
محل انتشار : کنفرانس بین المللی پژوهش های نوین در علوم کشاورزی و محیط زیست
آدرس وب سایت کنفرانس : aseconf.com
کد IOI مقاله : XYBF-AZZBH
لینک مستقیم مقاله : https://isnac.ir/XYBF-AZZBH

سایر مقالات محل انتشار
  1. اثر گرمایش جهانی بر فون و فلور اکوسیستم های قطبی شمال و جنوب
  2. بررسی وضعيت رويشي پايه هاي آلوده به زوال بلوط پس از برش بهداشتی در استان کرمانشاه مطالعه موردي منطقه كله زرد جلا لوند
  3. نقش رویکرد مشارکت در مدیریت توسعه روستایی
  4. بررسی و امکان تولید نان سلیاکی با به کارگیری خمیر ترش ذرت لاکتیکی
  5. سنجش میزان رضایت مندی مرتعداران از بیمه مرتع استان اصفهان- مطالعه موردی با تاکید بر مرتعداران بیمه گذار استان اصفهان
  6. طراحی سیستم مدیریت انرژی بر مبنای استاندارد ISO50001 در تصفیه خانه آب صنعتی مناطق نفتخیز جنوب
  7. بررسی مدل ریاضی جدید خشک کردن لایه نازک برای برگ نعنا با هوای داغ
  8. بررسی روشهای پیشگیری ازآسیبهای زیست محیطی، فرهنگی وشغلی گردشگری انبوه
  9. راه کارهای انتشار نوآوری درصنایع غذایی کوچک دریایی
  10. مدلسازی و بهینه سازی فن مکشی باد برای انتقال دانه نخود
  11. اثر دما بر برخي ويژگي‌هاي زيستي کفشدوزکOenopia conglobata contaminata (Menteries) با تغذيه از شته سبز هلو Myzus persicae (Sulzer) و پروانه بـيد آرد Ephestia kuehniella (Zell)
  12. تعیین کمیت و کیفیت پساب تولیدی در صنعت نوشابه سازی
  13. گیاه پنجه برگ راست(Potentilla recta)گیاه دارویی کمتر شناخته شده
  14. طراحی الگوی کشت متناسب با شرایط فرهنگی، اقتصادی و اقلیمی شهرستان زاغه با استفاده از روش تجزیه تحلیل سلسله مراتبی (AHP)
  15. بررسی اثر عصاره آبي تلخه بيانSophora alopecuriodes و آنغوزه Ferula assa-foetida دركنترل كرم طوقه بر