نمایش چکیده فارسی

Experimental Study of the Wear Resistance of Metals Using the Cladding Method and Investigation of the Effective Parameters on It

SAEEDREZA POORBATENI1

Abstract :
Nowadays, to increase the wear and corrosion resistance of metals, the main metal surface is covered with a cheap metal (of the same alloy or other metals), which is called plating. As a result of this work, in addition to the significant reduction of production and maintenance costs, the life of the parts also increases. The production of coated or clad sheets is an economical and optimal solution because corrosion-resistant materials are relatively expensive and using them in high thicknesses is not a logical solution from an economic point of view. Since the beginning of time, cladding sheets have been widely used in oil, gas and chemical industries. From the scope of these applications, heat exchangers cooled by sea water, pressure vessels, reactors and other equipment s in which there are sour gas and other corrosive substances can be mentioned. Cladding in different ways, such as electrical deposition, steam coating, metal spray (coating by spraying molten particles on the base metal), welding (including TIG welding, MIG welding, sub-powder welding, electric arc, plasma and explosive welding) is created the aim of the current research is to investigate the resistance against wear and corrosion of mechanical parts by welding welding and its effective parameters. In this method, 36 samples (i.e. 18 cases with double repetition) were coated with three layers of welding on a surface of the base metal, and after the wear test, the effect of three independent variables, the type of electrode, the first layer and the electric current of the welding machine, is investigated. In this research, it was observed that the coated parts under the pin-on-disk wear test had a reduction in weight due to wear, and compared to the base metal, the wear resistance and hardness of all the coated parts increased. These changes are different in three factors (electrode type, first layer and electric current). In the findings, it was found that when the electric current of the device has a lower limit, the part has better wear resistance and hardness. During this research, it was determined that the type of electrode structure and the selection of the first layer electrode and the changes caused by the electric current are effective in increasing the wear resistance of the part. To be clearer, it should be said that the type of electrode in the first layer and the amount of current have the greatest impact on this goal.

Keywords : welding coating wear resistance cladding wear of pin on disc


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : هشتمین کنفرانس بین المللی پژوهش های کاربردی در علوم و مهندسی
آدرس وب سایت کنفرانس : 8carse.com
کد IOI مقاله : XKFK-AZECHH
لینک مستقیم مقاله : https://isnac.ir/XKFK-AZECHH
نمایش چکیده فارسی : https://isnac.ir/SA/XKFK-AZECHH

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Effect Glass Cord on timing belts on pride and XU7 engines In Teeth separation from the Belts Using Johnson-Cook Equation and Finite Element ABAQUS Software
  2. Reinforced ShearConcrete Wall with Carbon Fiber Composite CFRP Under Bam Seismic Load with Using of Finite Element of ABAQUS Software
  3. Simulation, Analysis and Investigation of Reinforcing Concrete Shear Wall by Using CFRP Composite Mill Grid
  4. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  5. Effect of CFRP Composite Sheets on Cracks Growth Mechanism and Propagation in Steel Shear Wall Using Finite Element
  6. Simulation, Analysis and Evaluation of Progressive Collapse of Reinforced Concrete Structures Under Seismic Load Using Finite Element of ABAQUS Software
  7. Analysis and Investigation of Progressive Destruction In Six Floor Concrete Buildings Using Finite Element
  8. Stress-Strain Analysis and the Study of the Effect of Progressive Destruction on High-Concrete Structures Using Limited Finite Element
  9. Investigation and comparison of the amount of tensions applied on the timing belt at the moment of teeth separation from the bed in the Pride and xu7 engines in different materials of CR, HNBR and EPDM with various number of tensile members
  10. Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
  11. Supply chain Flexibility and Operational Performance Influenced by Highly Involved Human Resource Manager Practices
  12. Configuration Approach for Supply Chain Management Practices (Supply Chain Agility and Sustainability Performance )
  13. Evaluation and Finite Element Analysis of the Airfoil of the Airplane Wing Under the Effect of Applied Fluctuating Load
  14. Impact of the Time of Product Presentation to the Market and Evaluating the Success of Product Development Due to the Phenomenon of Target Costing
  15. Experimental and Analytical Investigation of Roller Bearing Scaling Defect Based on Hertzian Contact Model
سایر مقالات محل انتشار
  1. بررسی عناصر زیبایی‌شناسی حسی باغسازی فرانسه
  2. Optimizing Welding Techniques for Enhanced Structural Integrity in High-Temperature Alloys
  3. Evaluation of artificial intelligence in cyberspace security and data protection
  4. کاربرد تئوری HES در مدیریت و پایداری مراتع
  5. رابطه هوش هیجانی با استراتژی‌های مدیریت تعارضات در مدیریت پروژه‌های عمرانی
  6. Numerical investigation of the strength of adhesively bonded joints with different adherends
  7. Enhancing Airline Safety Management: Strategic Insights into KPI-Driven Oversight
  8. Investigating the vulnerability of carbonate (karst) and alluvial aquifers
  9. Investigating the destructive effects of using non-standard lubricants in the open gear of pellets factory discs and analyzing gear failures
  10. بررسی عددی جریان خون داخل کانال دایره ای به همراه جریان مغناطیسی
  11. مدل های پیش بینی رفتار خزشی در سوپر آلیاژهای ساخته شده به روش ساخت افزایشی
  12. Elevating Airline Innovation: A Strategic Approach to KPI-Driven Leadership
  13. یک رویکرد فازی بهینه برای بررسی موانع اجرای مدیریت پروژه چابک
  14. Elevating Airline Design and Production Excellence: A Strategic KPI Framework for DOA and POA Officers
  15. Elevating In-Flight Entertainment (IFE): A Strategic Approach to Performance Optimization