نمایش چکیده فارسی

Investigation and comparison of the amount of tensions applied on the timing belt at the moment of teeth separation from the bed in the Pride and xu7 engines in different materials of CR, HNBR and EPDM with various number of tensile members

Mohsen Roholamin1

Abstract :
Camshaft using the timing belt. In general, automotive companies announced that the time to replace the timing belt in best conditions is over 120,000km, but driving in undesirable conditions reduced the life of timing belts. If the timing belt is torn or slide, it caused engine to stop and even caused serious damages to it. When timing belt is torn during the motion, there will no special things happened, but in any case, if the car is turned off during the motion, it would not be turned on at all, because in some cars (like Persia or higher model cars) it caused the camshaft to be titled. The amount of tensions applied on the timing belt at the moment of teeth separation from the bed in the Pride and xu7 motors in different materials of CR, HNBR and EPDM with various number of tensile members.

Keywords : cr epdm hnbr timing belts xu7 engines


زبان مقاله : انگلیسی
محور مقاله : علوم مهندسی
محل انتشار : کنگره بین المللی علوم و مهندسی ژاپن - TOKYO
آدرس وب سایت کنفرانس : tuicet.com
کد IOI مقاله : XBHB-DHHFK
لینک مستقیم مقاله : https://isnac.ir/XBHB-DHHFK
نمایش چکیده فارسی : https://isnac.ir/SA/XBHB-DHHFK

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Effect Glass Cord on timing belts on pride and XU7 engines In Teeth separation from the Belts Using Johnson-Cook Equation and Finite Element ABAQUS Software
  2. Reinforced ShearConcrete Wall with Carbon Fiber Composite CFRP Under Bam Seismic Load with Using of Finite Element of ABAQUS Software
  3. Simulation, Analysis and Investigation of Reinforcing Concrete Shear Wall by Using CFRP Composite Mill Grid
  4. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  5. Effect of CFRP Composite Sheets on Cracks Growth Mechanism and Propagation in Steel Shear Wall Using Finite Element
  6. Simulation, Analysis and Evaluation of Progressive Collapse of Reinforced Concrete Structures Under Seismic Load Using Finite Element of ABAQUS Software
  7. Analysis and Investigation of Progressive Destruction In Six Floor Concrete Buildings Using Finite Element
  8. Stress-Strain Analysis and the Study of the Effect of Progressive Destruction on High-Concrete Structures Using Limited Finite Element
  9. Investigation and comparison of the amount of tensions applied on the timing belt at the moment of teeth separation from the bed in the Pride and xu7 engines in different materials of CR, HNBR and EPDM with various number of tensile members
  10. Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
  11. Supply chain Flexibility and Operational Performance Influenced by Highly Involved Human Resource Manager Practices
  12. Configuration Approach for Supply Chain Management Practices (Supply Chain Agility and Sustainability Performance )
  13. Evaluation and Finite Element Analysis of the Airfoil of the Airplane Wing Under the Effect of Applied Fluctuating Load
  14. Impact of the Time of Product Presentation to the Market and Evaluating the Success of Product Development Due to the Phenomenon of Target Costing
  15. Experimental and Analytical Investigation of Roller Bearing Scaling Defect Based on Hertzian Contact Model
سایر مقالات محل انتشار
  1. The role of architecture compatible with climate in context-based architecture (case study: Bushehr and Yazd)
  2. واکاوی مفاهیم و کارکردهای معماری سبز در طراحی بناهای بلند مرتبه
  3. مدیریت ایده پردازی و نقش آن در تحول مهندسی معماری
  4. Investigating the components of creativity promotion in Gilan s native architecture Case Study: Sustainable Architecture
  5. Investigation of the beams and columns connection with infill plate on the structural behavior of the steel plate shear walls
  6. بررسی رفتار لرزه ای اتصالات مرکب پیچی تحت تأثیر مقاومت فشاری بتن پرکننده ستونCFST تحت بار چرخه ای
  7. Nonlinear Incremental Dynamic Analysis
  8. Data Mining: To determine the optimal order point in inventory control system
  9. Applications of nanoparticles containing ginger (Zingiber officinale) extract to improve the stability of encapsulated ginger
  10. بررسی کاربرد هسته خرما در غنی سازی نان
  11. Determination of the protective radius of the arrester in the distribution network based on the Isokraunic indexes
  12. کاربرد تجزیه و تحلیل سیستم اندازه گیری در صنعت خودروسازی: مروری بر ادبیات موضوع
  13. Solar energy gain comparison for one axis three position sun tracking versus fixed PV system: Case study Urmia-Iran
  14. برآورد ارتفاع موج با استفاده از تصاویر رادار سار (SAR) در منطقه دریایی امیرآباد به روش رگرسیون خطی
  15. بررسی خوانش نیچه از سرگذشت دیُنوسُس و آیین آن