نمایش چکیده فارسی

Effects of ozonation and Alum coagulation on urban wastewater treatment excessive sludge quality improvement

Mohamad Reza Sabour1 Alireza Rezaee2 Soodabeh Mehbudi3

Abstract :
Sludge excess treatment and disposal is a problem for most wastewater treatment plants in the world, considering the economic, environmental, social, and legal aspects. The amount produced by the sludge in the wastewater plants should be reduced to the possible extent to reduce the excessive costs of investment and management of a wastewater treatment plant. Furthermore, it is also necessary to minimize the turbidity of the supernatant left over from the process to a possible extent so that it may be used for irrigation and other recreational purposes. To achieve this purpose, thickening and dewatering of sludge methods are used. Since the conditioned sludge readily forms condensable and dehydrated products, sludge preparation operations are necessary in sewage treatment plants. The present study deals with the effect of ozone and alum on the quality improvement of excess sludge from the Shiraz sewage treatment plant. In this regard, an experiment was conducted in which alum acted as a coagulant and ozone as an oxidizer in excess sludge, both individually and concurrently. For that, a pilot model was used in the form of a glass cube of size 3 liters and measured the parameters like SS, TSS of sludge, and supernatant s turbidity. The variable parameters were optimized first, like pH and dosage for ozone and alum. By the achieved optimum parameters, the sludge sedimentation improved by 34.3%, and Total suspended solids increased by 22.7% through the use of Ozone injection. Sludge sedimentation improved by 31.3% and 29.3%, while the total suspended solids increased by 32.2% and by 31.5% with alum addition under optimum parameters. The combined process of ozone injection and adding alum had a maximum 43.4% reduction in sludge volume.

Keywords : ozonation coagulation alum sludge improvement wastewater


زبان مقاله : انگلیسی
محور مقاله : مهندسی محیط زیست و محیط زیست شهری
محل انتشار : دهمین کنگره سالانه بین المللی عمران، معماری و توسعه شهری
آدرس وب سایت کنفرانس : 10icsau.ir
کد IOI مقاله : XKHE-AZEDGA
لینک مستقیم مقاله : https://isnac.ir/XKHE-AZEDGA
نمایش چکیده فارسی : https://isnac.ir/SA/XKHE-AZEDGA

سایر مقالات محل انتشار
  1. پیشرفت‌ها و چالش‌ها در کاربرد هوش مصنوعی در مهندسی عمران: یک بررسی جامع
  2. ارزیابی روش‌های مختلف نوفه‌زدایی در حوزه‌ فرکانس در شناسایی سازه‌های خمشی
  3. مقایسه پارامترهای آموزش شبکه عصبی جهت نوفه زدایی در شناسایی سیستم
  4. بررسی و مروری کامل بر حفاظت میراث آثار تاریخی معماری در روند توسعه شهری و جامعه ی مدرن
  5. بررسی و تحلیل معماری سنتی ایران در خانه های بافت قدیمی
  6. بررسی موانع انتقال تکنولوژی میان دانشگاه و صنعت با استفاده از روش TOPSIS
  7. نقش استانداردهای ساختمان های سبز و مصالح سبز با رویکرد توسعه پایدار و محیط زیست در صنعت ساختمان
  8. ارائه مولفه های موثر در طراحی هتل بیمارستان تخصصی با تاکید بر گردشگری درمانی در شهر مشهد
  9. تبیین همبستگی فرم معماری کهن در معماری معاصر بناهای فرهنگی ایران(نمونه موردی: ساختمان تئاتر شهر و موزه هنرهای معاصر)
  10. تحلیل رمزگان ارسی‌ها در معماری اسلامی (نمونه مطالعاتی؛ خانه زندیه چالشتر)
  11. Assessing the Contemporary Landscape of Building Information Modeling (BIM)
  12. معماری معاصر، سبک شناسی و فناوری های نو
  13. برخی راهکارهای طراحی داخلی برای کلینیک تخصصی کودکان اوتیسم با رویکرد هنردرمانی
  14. نقش مسیر گردشگری در پیوند عناصر با ارزش تاریخی-باستانی و اثرات فضایی آن، مطالعه موردی: شوش دانیال
  15. تحلیل زمینه های موثر در تاب آورسازی کالبدی سکونتگاه های شهری، مطالعه موردی: بافت تاریخی - قدیمی شهر خرم آباد