جستجو
Evaluating the Influence of Micro Silica Content on Concrete Mechanical Properties: An Experimental Study
Amirhossein Arman1 Ehsan Kuse Sedan2 Erfan Shafei3
Abstract :
Due to the limited area of land and the increase in the population of the land, and with the increase in demand and the need to expand construction, the role of concrete in construction projects is undeniable. The pollutant footprints caused by the cement production process include a significant part of the 5-8% global CO2 emissions. Due to the use of fossil fuels in the exploitation process, the transportation of limestone to cement factories, and the necessary energy to convert limestone into cement, non-renewable sources are used, and a significant amount of CO2 is emitted. In recent years, to reduce environmental pollution caused by cement production, the need to adopt innovative methods and materials such as the use of pozzolans and supplementary cementitious materials (SCMs): micro silica (MS), fly ash (FA), and silica fume (SF) has received more attention. The current research examines the mechanical properties of concrete with MS contents (10%, 20%, and 30%) as a partial replacement for the weight of cement used in the mixing design. Before the test date, samples were prepared under standardized conditions and cured in a tank with limewater saturated at 23±1C°. Under the standard, the average of two samples calculated the unconfined compressive strength (UCS) value for each day test. Mechanical properties were evaluated through unconfined UCS tests on 24 concrete 100*100*100 mm cube specimens from 4 mixing designs at 7, 14, and 28 curing days. The results indicate that the inclusion of MS enhances UCS by 14%, 24%, and 43% at the respective testing ages compared to the control specimens. The highest UCS was observed in the mix design with 30% MS replacement. Based on the findings, it can be concluded that MS addition improves the UCS of concrete specimens at all ages. Furthermore, a comparative analysis of the results reveals a direct correlation between increasing MS content and enhanced compressive strength.
Keywords : micro silica content supplementary cementitious materials (scms) concrete mechanical properties polycarboxylate superplasticizer high performance concrete (hpc)
زبان مقاله : انگلیسی
محور مقاله : مهندسی عمران و توسعه پایدار
محل انتشار : چهارمین کنگره بین المللی مهندسی عمران ، معماری ، مصالح ساختمانی و محیط زیست
آدرس وب سایت کنفرانس : caucong.com/4th
کد IOI مقاله : AZAE-AAAGZA
لینک مستقیم مقاله : https://isnac.ir/AZAE-AAAGZA
سایر مقالات ارائه دهنده
- Investigations Impact of Super Fly Ash Plus on Concrete Mechanical Behavior
- Enhanced Early Strength and Performances of GGBFS-Based Alkali-Activated Self-Compacting Low Carbon Concrete
- Evaluating the Influence of Micro Silica Content on Concrete Mechanical Properties: An Experimental Study
- Experimental Investigation of High-Strength Concrete Using Urmia Local Materials
- Developing Ultra-High-Performance Concrete Using Local Materials from West Azerbaijan: An Experimental Study
- Exploring microsilica’s role in ultra-high-strength concrete: An experimental study
- Beyond Recycling: A Life-Cycle and Performance-Based Framework for Integrating End-of-Life Wind Turbine Blade Waste into Sustainable Construction Materials
- مطالعه عددی اثر انحراف فلپ ساده و زاویه حمله بر عملکرد آیرودینامیکی ایرفویل HQ42
- CFD Investigation of Slot-Driven Flow Structures over a Fowler-Flapped HQ42e Airfoil
سایر مقالات محل انتشار
- بهینه سازی مسیریابی در شبکه های شهری با استفاده از مدیریت هوشمند ترافیک
- توسعه پایدار و معماری سبز
- Analysis of Symbolic Architecture in the Pahlavi Era: Decoding Nationalism through Monumental Structuresو case study: monuments of Tehran in the first Pahlavi era
- ارزیابی چرخه عمر ساختمان های هوشمند: مطالعه تطبیقی اثرات زیست محیطی
- تاثیر استفاده نانوذرات GO/FeNi3 بر پارامترهای مقاومت کششی بتن
- بررسی دوام بتن های حاوی نانوذرات KCC_1/Ag در برابر یخبندان و ذوب
- ایستگاه راه آهن مشهد: دروازه تشرف
- Investigation and thermal performance comparison of lightweight clay block with vertical void additives for external walls
- بررسی راهکار های سازه ای و غیر سازه ای مدیریت منابع اب رفسنجان
- ریسکهای شناسایی شده در پروژه های ساختمانی در 15 سال گذشته ( مقاله مروری نظام مند)
- مشخصات مصالح و عملکرد سیستم نمای پرده باران با پنلهای آجری
- نقش سیستم های حملونقل هوشمند(ITS) در حل مشکلات حملونقل شهری
- Environmental Protection in the Construction Industry for Achieving Sustainable Development
- معماری بیونیک
- The role of climate on native and sustainable architecture