نمایش چکیده فارسی

Exploring microsilica’s role in ultra-high-strength ‎‎‎concrete: An ‎experimental study

Amirhossein Arman1 Ayda Kazemi Motlagh2 Erfan Shafei3 Ehsan Kuse sedan4 Tadeh Zirakian5 Mohammad reza Saei6

Abstract :
The production of cement significantly contributes to global CO₂ emissions. ‎Therefore, it is essential to ‎‎identify alternative supplementary cementitious materials ‎‎(SCMs), such as fly ash, micro silica, and slag, ‎‎that enhance concrete performance ‎while reducing environmental impact. Among these, micro silica (MS) ‎‎is considered ‎one of the most effective SCMs. It is an ultrafine amorphous silica produced as a ‎‎byproduct ‎of electric arc furnace processes during the production of silicon or ‎ferrosilicon alloys. Due to its high ‎‎pozzolanic reactivity and microfiller effect, MS ‎contributes to matrix densification and reduced porosity, ‎‎thereby enhancing the ‎strength and durability of concrete. This study investigated the effect of MS on ‎the ‎‎mechanical behavior of ultra-high-strength concrete (UHSC). Basalt aggregates are ‎suitable for use ‎due to ‎their high strength, low reactivity, and excellent durability. ‎For this purpose, based on both ‎technical and ‎economic considerations, a 65: 35 ‎coarse and fine aggregate mixture was selected. To this ‎end, 24 cubic ‎specimens (100 ‎mm) were prepared using four mix designs containing 0 (control ‎scheme), 5, 10, and ‎‎15% ‎MS by weight of cement. All mixes had a constant water-to-cement ratio (W/C) ‎of ‎‎0. 0.2 and identical ‎basalt aggregate grading. Compressive strength tests were ‎conducted at curing ages of 7, ‎‎14, and 28 days. ‎Specimens were prepared under ‎standardized conditions and cured in a saturated lime-water tank at a ‎‎controlled ‎temperature of 23 ± 1 °C until testing‎. The present study s findings showed ‎that the ‎highest ‎compressive strength, recorded at 133 MPa, was achieved at 28 days for the ‎specimen ‎containing 15% MS, ‎representing a 25% increase compared to the control ‎scheme. The observed increase ‎in ‎compressive ‎strength is attributed to the ‎pozzolanic reactions of MS, which reduce total porosity, limit ‎pore ‎connectivity, and ‎promote matrix densification in the concrete microstructure.‎

Keywords : ultra high strength concrete (uhcs) supplementary ‎cementitious materials ‎‎(scms) microsilica content superplasticizer pozzolanic materials basalt‎


زبان مقاله : انگلیسی
محور مقاله : مهندسی عمران و توسعه پایدار
محل انتشار : سومین کنفرانس بین المللی پژوهش های کاربردی در مهندسی عمران، معماری و شهرسازی
آدرس وب سایت کنفرانس : icarcau.com/3rd
کد IOI مقاله : AACC-AAHAKA
لینک مستقیم مقاله : https://isnac.ir/AACC-AAHAKA
نمایش چکیده فارسی : https://isnac.ir/SA/AACC-AAHAKA

سایر مقالات محل انتشار
  1. Integrating Smart Technology into Sustainable Architecture: Innovations, Benefits, and Future Prospects
  2. Comparison of Germany s Sustainable Architecture Model with Other European Countries
  3. حکمروایی شایسته و مشارکت مردمی در توسعه شهری پایدار
  4. توسعه صنعت گردشگری در جهت توسعه پایدار شهری
  5. بررسی پیامدهای انفجار و نشت گاز در مخازن جایگاه سوخت فرهنگیان آبادان
  6. Emotional Sustainability and Place Attachment in Post-Industrial Parks: Duisburg Nord vs. High Line
  7. فضا به‌ مثابه شخصیت؛ تبیین کارکردهای معنایی مکان در سینمای دراماتیک دهه شصت ایران (مطالعه موردی: فیلم مادر و اجاره‌نشین‌ها)
  8. بررسی تاثیر رطوبت در معماری بومی مازندران
  9. برنامه‌ریزی توسعه گردشگری خلاق در شهر گز با رویکرد ارتقای سرزندگی مورد مطالعه: شهر گز
  10. سنجش و ارزیابی میزان تحقق‌پذیری طرح‌های هادی روستایی (مطالعه موردی: روستای قلعه رَش شهرستان سردشت)
  11. سطح بندی سکونتگاه های روستایی و تعیین عوامل مؤثر بر توسعه آنها (مطالعه موردی: شهرستان قزوین)
  12. راهکارهای برون رفت از بحران سیلاب در استان سیستان و بلوچستان
  13. تأثیر اقلیم سردکوهستانی بر طراحی معماری پایدار: راهکارها و چالش‌ها در طراحی سازگار با شرایط جوی مختلف
  14. تحلیلی بر نقش باغموزهها در توسعه گردشگری
  15. Designing multi-purpose furniture for post-disaster temporary shelters and small houses