نمایش چکیده فارسی

Experimental Investigation of Incremental Sheet Forming into Complex Geometries Using Aligned Positive and Negative Dies

ZAHRA MORADI1

Abstract :
This study presents an experimental investigation into the incremental sheet forming (ISF) of complex geometries. A two-point ISF setup incorporating both negative and positive dies is utilized to fabricate a part featuring positive and negative truncated cone profiles. The workpiece material used is 1 mm thick aluminum alloy 3105. The study examines the influence of key process parameters—including the sequence of die usage (positive/negative versus negative/positive), incremental step depth, and tool rotational speed—on the maximum attainable inner and outer heights of the formed part. The tested ranges for step depth and rotational speed are 0.2–0.6 mm and 0–1000 rpm, respectively. Experimental findings demonstrate that shifting the forming sequence from positive/negative to negative/positive significantly enhances both outer and inner formability. Additionally, results show that reducing the step depth and increasing the tool’s rotational speed contribute positively to height maximization. Through signal-to-noise ratio analysis, the optimal combination of process parameters is identified as the negative/positive sequence, 0.2 mm step depth, and 1000 rpm rotational speed for maximizing both internal and external part dimensions.

Keywords : two point incremental sheet forming (tpisf) aluminum alloy experimental design methodology (doe)


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : دومین کنگره بین المللی علوم مهندسی و توسعه شهری پایدار
آدرس وب سایت کنفرانس : dtuconf.com
کد IOI مقاله : AAAB-AADDAC
لینک مستقیم مقاله : https://isnac.ir/AAAB-AADDAC
نمایش چکیده فارسی : https://isnac.ir/SA/AAAB-AADDAC

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
  1. Advanced Wound Dressings Using Electrospinning Technology
  2. ادبیات: هنر کلامی، معماری: هنر بی کلام
  3. بررسی تاثیر زیبایی شناسی در معماری بر بهزیستی- روان شناختی ساکنین نمونه موردی: ساختمان‌ های مسکونی بلند مرتبه مشهد (مطالعه مروری)
  4. بازگشت به ریشه‌ها: تلفیق سنت و مدرنیته در معماری مسکن برای ارتقای کیفیت زندگی
  5. A review on Impacts of climate change on rangelands Soil surface water content, albedo, vegetation cover, vegetation distribution
  6. طراحی مجتمع مسکونی با رویکرد معماری پایدار
  7. Modified polyethylene terephthalate membrane for extraction of polycyclic aromatic hydrocarbons
  8. ادغام فناوری های نوین با روش های سنتی معماری در مجموعه های مسکونی کاشان
  9. Energy Optimization in Nanoelectronic Circuits Using Reinforcement Learning
  10. Automated Design of Smart Nanoelectronic Sensors Using Generative Adversarial Networks
  11. (معماری سبز و همزیستی با طبیعت، گامی به سوی پایداری (نمونه موردی: ساختمان شهرداری در سوئد))
  12. A Review of Dust Storm Trends in Major Middle Eastern Cities and the Influence of Meteorological Parameters (2015–2025)
  13. Proposing Climatic Design Strategies for Residential Buildings in Iran’s Hot and Humid Climate Using Climate Consultant Software: A Case Study of Chabahar City
  14. تحلیل ویژگی و اصول معماری همساز با اقلیم ساختمان های مسکونی در اقلیم گرم و خشک ( مطالعه موردی شهر کاشان )
  15. Analysis of Environmental Justice in the Development of Sustainable Urban Landscapes: A Case Study of Zanjan City, Iran