نمایش چکیده فارسی

Seismic Retrofitting of Concrete Structures under Earthquake Loads Using Viscous Dampers: Modeling, Analysis, and Performance Evaluation

MOHSEN ZARE SHARIF1 MASOUD VAHIDI2 SEYED MOHAMAD ALAVIFAR3

Abstract :
Seismic retrofitting of concrete structures against earthquake loads is one of the primary challenges in structural design. This paper investigates the impact of using viscous dampers to enhance the dynamic behavior and retrofitting of concrete buildings under seismic loads. Experiments conducted on concrete buildings equipped with viscous dampers demonstrate a significant reduction in applied moments and stresses on the structure compared to buildings without dampers. Specifically, the results showed that the use of viscous dampers reduced the moments by 35% and the stresses in sensitive areas of the structure by up to 30%. Moreover, an improvement in the buildings natural frequency was observed in the presence of viscous dampers, which significantly enhances the stability and safety of the structures against earthquakes. The experimental results reveal that the natural frequency of buildings reinforced with viscous dampers increased by 18% compared to structures without dampers. Additionally, the acceleration applied to structures with dampers was, on average, reduced by 25%, which decreases the likelihood of structural damage under severe seismic loads. The use of viscous dampers is not only effective in reducing dynamic and structural responses but is also economically viable, as it reduces repair and maintenance costs and increases the lifespan of the structure. Overall, the findings of this study indicate that viscous dampers are an effective and practical option for retrofitting concrete buildings against earthquakes.

Keywords : concrete building retrofitting viscous damper seismic loads applied moments structural stresses natural frequency


زبان مقاله : انگلیسی
محور مقاله : مهندسی عمران
محل انتشار : چهارمین کنفرانس بین المللی پژوهش ها و دستاوردهای نو در علوم، مهندسی و فناوری های نوین
آدرس وب سایت کنفرانس : setbconf.com
کد IOI مقاله : AZEK-AADDAF
لینک مستقیم مقاله : https://isnac.ir/AZEK-AADDAF
نمایش چکیده فارسی : https://isnac.ir/SA/AZEK-AADDAF

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
  1. 3D Bioprinting in Organ Regeneration: Challenges, Innovations, and Future Prospects
  2. ارزیابی ریسک های مدیریت دانش پروژه با استفاده از یک رویکرد تلفیقی FMEA_ANP (مطالعه موردی: شرکت معدنی و صنعتی گل گهر)
  3. Advancements in 3D Bioprinting: Bridging the Gap Between Tissue Engineering and Regenerative Medicine
  4. بررسی میزان اثربخشی نمای دوجداره در پوشش های ساختمانی با تأکید بر کنترل فاکتورهای موثر در بهره وری مصرف انرژی
  5. پروتکل مک و متد جهت‌دار برای شبکه‌های ادهاک با مدل آنتن‌های جهت‌دار
  6. بررسی نسل های مختلف فولادهای با استحکام بالا و مکانیزم های تغییر شکل آنها
  7. کاربرد هوش مصنوعی در بهینه‌سازی عملکرد انرژی ساختمان‌های پایدار (تمرکز بر تکنولوژی)
  8. بررسی خصوصیات شیمیایی هیدروکلوئیدها به منظور افزایش ماندگاری برگر ماهی کفال
  9. بررسی مدیریتی وجود فلزات سنگین در برنج محلی کشاورزان بندر ترکمن
  10. The Impact of Regional Planning on Nutritional Outcomes: A Systematic Review
  11. Socialization in Aviation: The Art of Building Connections in the Skies
  12. The Integration of AI in Architecture and Construction: Trends, Challenges, and Opportunities
  13. ناپايداري شهر و عوامل موثر در اصفهان
  14. Interior architecture based on increasing the peace and comfort of residents with the help of environmental forces
  15. Dual Slant-Polarized Cross Dipole Antenna for TDD-LTE Networks