نمایش چکیده فارسی

Experimental Study and Investigation of the Effect of Nano Silica and Nano Clay on the Tensile Strength Properties of Silent Joints (UPVC)

ZAHRA FOROUTANFAR1

Abstract :
This research presents a comparative experimental study on the enhancement of tensile strength in silent UPVC pipe fittings using nano-silica and montmorillonite nano-clay reinforcements. Silent UPVC systems, while effective in noise reduction, often suffer from limited mechanical performance, particularly under tensile loads. To address this limitation, nano-silica (average particle size: 20–40 nm) and nano-clay (average particle size: 50–100 nm) were incorporated at varying weight percentages (0 wt%, 1 wt%, 2 wt%, and 3 wt%) into the UPVC matrix via melt blending. The tensile properties of the resulting nanocomposites were evaluated according to ASTM D638 standard. Scanning electron microscopy (SEM) was employed to examine the dispersion of nanofillers and the morphology of the fracture surfaces. The results indicated a notable improvement in tensile strength with both nanoparticles, with an optimal performance observed at 2 wt%. At this concentration, nano-silica increased the tensile strength by approximately 28.3%, while nano-clay contributed to a 21.7% enhancement, compared to the neat UPVC control sample. SEM analysis confirmed better dispersion and interfacial adhesion in nano-silica-filled samples, which correlates with the higher tensile performance. These findings demonstrate that incorporating nano-silica or nano-clay into silent UPVC fittings is an effective strategy to overcome mechanical limitations without compromising acoustic properties. The study provides a valuable foundation for the development of reinforced low-noise piping systems in civil and industrial applications.

Keywords : upvc fittings nano silica nano clay tensile strength mechanical reinforcement nanocomposites silent piping systems


زبان مقاله : انگلیسی
محور مقاله : مهندسی شیمی
محل انتشار : دومین کنگره بین المللی علوم مهندسی و توسعه شهری پایدار
آدرس وب سایت کنفرانس : dtuconf.com
کد IOI مقاله : AAAB-AAFDGH
لینک مستقیم مقاله : https://isnac.ir/AAAB-AAFDGH
نمایش چکیده فارسی : https://isnac.ir/SA/AAAB-AAFDGH

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
  1. Advanced Wound Dressings Using Electrospinning Technology
  2. ادبیات: هنر کلامی، معماری: هنر بی کلام
  3. بررسی تاثیر زیبایی شناسی در معماری بر بهزیستی- روان شناختی ساکنین نمونه موردی: ساختمان‌ های مسکونی بلند مرتبه مشهد (مطالعه مروری)
  4. بازگشت به ریشه‌ها: تلفیق سنت و مدرنیته در معماری مسکن برای ارتقای کیفیت زندگی
  5. A review on Impacts of climate change on rangelands Soil surface water content, albedo, vegetation cover, vegetation distribution
  6. طراحی مجتمع مسکونی با رویکرد معماری پایدار
  7. Modified polyethylene terephthalate membrane for extraction of polycyclic aromatic hydrocarbons
  8. ادغام فناوری های نوین با روش های سنتی معماری در مجموعه های مسکونی کاشان
  9. Energy Optimization in Nanoelectronic Circuits Using Reinforcement Learning
  10. Automated Design of Smart Nanoelectronic Sensors Using Generative Adversarial Networks
  11. (معماری سبز و همزیستی با طبیعت، گامی به سوی پایداری (نمونه موردی: ساختمان شهرداری در سوئد))
  12. A Review of Dust Storm Trends in Major Middle Eastern Cities and the Influence of Meteorological Parameters (2015–2025)
  13. Proposing Climatic Design Strategies for Residential Buildings in Iran’s Hot and Humid Climate Using Climate Consultant Software: A Case Study of Chabahar City
  14. تحلیل ویژگی و اصول معماری همساز با اقلیم ساختمان های مسکونی در اقلیم گرم و خشک ( مطالعه موردی شهر کاشان )
  15. Analysis of Environmental Justice in the Development of Sustainable Urban Landscapes: A Case Study of Zanjan City, Iran