نمایش چکیده فارسی

The effect of impeller blades number on the performance of a centrifugal pump with complete and trimmed impeller

masoomeh shadab1 Rasoul Paydar Nobakht2

Abstract :
This numerical investigation is carried out on a centrifugal pump to show the effect of the impeller blade number on the pump performance in the complete and trimmed impeller conditions. Four different combined conditions with 3, 5, and 7 blades and the impellers diameter of 404mm and 347mm are tested numerically and the centrifugal pump performance is investigated in the terms of pump head (H), hydraulic power (Phydraulic) and torque on the rotating surface (T) due to recognizing the optimum geometry. All numerical tests are conducted at a constant rotational speed of 2950 rpm. The pumps’ impellers and volute are designed in CFTurbo software and analyzed in Ansys CFX as a CFD commercial code. The results demonstrate a strong influence of the trimming on the performance of the centrifugal pump. All performance parameters tend to be sensitive against the change in the impeller diameter rather than the change in the number of blades. It is found that the head coefficient (ψ) and the efficiency (η) are the highest for the case of the impeller with 7 blades and the impeller diameter of 404mm than that for the case of 3 blades with complete impeller and the cases of 7 and 5 blades with trimmed impellers. Eventually, the losses decrease by increasing the blades number due to the reduction of the secondary flow for a certain limit, and then it increases again because of the friction losses in the impeller. All these results are presented in this paper.

Keywords : centrifugal pump pump performance curve impeller trimming blades number of centrifugal pump impeller torque ansys cfx cfturbo hydraulic power


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : سومین کنگره بین المللی مهندسی، فناوری و نوآوری
آدرس وب سایت کنفرانس : eticong.com/3rd
کد IOI مقاله : XDHC-FCCGA
لینک مستقیم مقاله : https://isnac.ir/XDHC-FCCGA
نمایش چکیده فارسی : https://isnac.ir/SA/XDHC-FCCGA

سایر مقالات محل انتشار
  1. بررسی تنش اعضای ساختمان فولادی دارای ابربادبند در هنگام خرابی پیشرونده
  2. راهکارهای حفظ و مدیریت منابع آب و جلوگیری از ایجاد خشکسالی(منطقه مطالعاتی استان کردستان)
  3. سیستم های متداول سازه¬ای در ساختمان های بلند
  4. استخراج خواص درون پالس سیگنال گسیل کننده رادار مبنی بر تجزیه حالت تجربی
  5. The effect of steel coatings on the reinforcement of high strength concrete beams
  6. EFFECTS OF INCREASING BAFFLE’S DEFLECTION ANGLE ON HEAT EXCHANGERS
  7. ساختار کلی انرژی خورشیدی سلول های خورشیدی (فتوولتائیک) و پنل های خورشیدی
  8. نقش فناوری اطلاعات و ارتباطات در توسعه کشاورزی هوشمند
  9. بررسی ضخامت بهینه دیوار با رویکرد حرارتی در سیستم ساختمانی ICF
  10. Evaluation of water quality of Mahabad Ardestan, agricultural wells in terms of drinking standard
  11. ارزیابی ریسک سلامت فلزات سنگین در منابع آب با تأکید برشاخص آژانس حفاظت محیط زیست(EPA)
  12. Ecommerce: Digital marketing success by customer experience
  13. Customer Relationship Management (CRM) in the State-of-the-art Internet Services
  14. Effect of loaded frankincense extract on polymer and solid lipid nanoparticles on an animal model of Alzheimer s
  15. The effect of impeller blades number on the performance of a centrifugal pump with complete and trimmed impeller