Microstructure and fractography of Ti/Al laminated composite processed by solid state diffusion bonding and annealing treatment

Amir Hossein Assari¹ Beitallah Eghbali²

Abstract :
Recently, there has been a remarkable interest in Ti/Al laminated composites because of their high strength and low weight structures. This article explores the synthesis of Ti/Al laminated composites through diffusion bonding including hot pressing (applied under the compression stress of 40 MPa at 570 °C for 1 hour) and hot rolling (applied at about 450 °C to 30% and 57% thickness reduction). The effects of annealing temperatures (550, 600 and 650 °C) and times (2, 4 and 6 hours) on microstructures and fracture surfaces have been studied. The results of X-ray diffractometer (XRD) and energy dispersive spectrometer (EDS) confirmed that TiAl3 is the only intermetallic compound detected at the interface of Ti/Al layers. In addition, based on the results of the scanning electron microscope (SEM), the thickness of TiAl3 layer increased with the increase in both annealing temperature and time. Also, it is interesting to note that the thickness of TiAl3 compound increased when strain hardening increased, and then the growth behavior of the intermetallic compound changed from linear to parabolic. The characterization of Al and Ti sides of fracture surfaces indicated that a high amount of dimples was concentrated at the center of necked regions and the ductile fracture occurred in original patterns of Ti and Al layers. Furthermore, the TiAl3 compound grew and original patterns of Al and Ti disappeared when annealing temperatures and times increased. The results showed that intergranular fracture took place in TiAl3 compound with rock-candy appearance.

Keywords : diffusion bonding annealing fracture intermetallic compound microstructure

---

زبان مقاله : انگلیسی
محور مقاله : مهندسی متالوژی
محل انتشار : سومین کنگره بین المللی مهندسی، فناوری و نوآوری
آدرس وب سایت کنفرانس : eticong.com/3rd
کد IOI مقاله : XDHC-FEZAH
لینک مستقیم مقاله : https://isnac.ir/XDHC-FEZAH
نمایش چکیده فارسی : https://isnac.ir/SA/XDHC-FEZAH

سایر مقالات ارائه دهنده

1. Effect of alloying elements on microstructure of aluminum-based piston alloys: experimental and simulation studies
2. Microstructure and fractography of Ti/Al laminated composite processed by solid state diffusion bonding and annealing treatment

سایر مقالات محل انتشار

1. بررسی تنش اعضای ساختمان فولادی دارای ابربادبند در هنگام خرابی پیشرونده
2. راهکارهای حفظ و مدیریت منابع آب و جلوگیری از ایجاد خشکسالی(منطقه مطالعاتی استان کردستان)
3. سیستم های متداول سازه¬ای در ساختمان های بلند
4. استخراج خواص درون پالس سیگنال گسیل کننده رادار مبنی بر تجزیه حالت تجربی
5. The effect of steel coatings on the reinforcement of high strength concrete beams
6. EFFECTS OF INCREASING BAFFLE’S DEFLECTION ANGLE ON HEAT EXCHANGERS
7. ساختار کلی انرژی خورشیدی سلول های خورشیدی (فتوولتائیک) و پنل های خورشیدی
8. نقش فناوری اطلاعات و ارتباطات در توسعه کشاورزی هوشمند
9. بررسی ضخامت بهینه دیوار با رویکرد حرارتی در سیستم ساختمانی ICF
10. Evaluation of water quality of Mahabad Ardestan, agricultural wells in terms of drinking standard
11. ارزیابی ریسک سلامت فلزات سنگین در منابع آب با تأکید برشاخص آژانس حفاظت محیط زیست(EPA)
12. Ecommerce: Digital marketing success by customer experience
13. Customer Relationship Management (CRM) in the State-of-the-art Internet Services
14. Effect of loaded frankincense extract on polymer and solid lipid nanoparticles on an animal model of Alzheimer s
15. The effect of impeller blades number on the performance of a centrifugal pump with complete and trimmed impeller