Finite Element Simulation of L- Section Rolling Process Using Arbitrary Lagrangian-Eulerian (ALE) Formulation

MOJTABA HEYDARI1

Abstract :
L-Section Rolling, is a process that is used worldwide and the use of the process increases every year. However, the understanding of the rolling process is limited and so is the science about the process. The reason for this is that the complex geometry of the process has made it difficult to develop simple models for how the work piece will be formed. Only a few analytical models for the blank deformation are found in the literature. Another approach to investigate the deformation in the work piece is to use FE analyses. Very little has been published about FE analyses of L-section rolling process. This may be due to the fact that the simulations are still very time consuming. In this paper, 3D models of L-section rolling process has been simulated by finite element method to study the Deformation of blank, Distribution of stress, Shear and Mises stress contours, Distribution of spatial displacement contours and Contour of equivalent plastic strain in a L-section rolling process. All studies presented in this paper have been carried out on aluminum alloy EN AW-7108 T6.

Keywords : finite element simulation l section rolling ale arbitrary lagrangian eulerian aluminum alloy en aw 7108 t6


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : چهارمین کنفرانس بین المللی پیشرفت های اخیر در مهندسی، نوآوری و تکنولوژی - بلژیک
آدرس وب سایت کنفرانس : eitconf.com
کد IOI مقاله : ABEB-ABFGAG
لینک مستقیم مقاله : https://isnac.ir/ABEB-ABFGAG

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
  1. سنجش رفتار میرایی رس‌های نمکی تحت تحرکات دینامیکی: مطالعه موردی جزیره هرمز
  2. کاربرد فناوری بالک چیکن در ردیابی و شفاف سازی زنجیره غذایی برای افزایش ایمنی واعتماد مصرف کننده با استفاده از الگوریتم کندوی عسل
  3. زیبایی شناسی و خلاقیت در استدلال ریاضی: تحلیلی بر اثبات و اندیشه غیررسمی در تحقیقات دکتری
  4. The Role of the Root System in Flowering
  5. Effect of Nutrition on the Root System in Strawberry Plants
  6. تدوین الگوهای طراحی معماری برای ارتقای هویت اجتماعی زنان در مراکز فرهنگی شهری؛ مطالعه موردی: چند فرهنگسرای منتخب شهر تهران
  7. Application of Machine Learning in Analyzing Managerial and Environmental Factors Influencing the Development of Emerging Sports (Case Study: Fusion Fitness)
  8. ارتقاء ایمنی در صنعت ساخت با تکیه‌بر فناوری‌های نوین: ابزارها، دستاوردها و چالش‌های استقرار
  9. رویکرد یکپارچه فناوری‌های هوشمند و مدیریت کنترل پروژه برای کاهش ریسک در سیستم‌های تحت فشار سنگین صنایع استراتژیک
  10. Finite Element Assessment and Experimental Validation of an Aluminum L-Bracket Under Static, Thermal, and Harmonic Loading
  11. Nano-Delivered CRISPR/Cas9 for Cancer Therapy: Targeting Tumorigenic Genes through Epigenetic Modulation and Pathway Disruption
  12. Gold Nanoparticle‑Assisted Hyperthermia for Cancer Treatment: Current Methods, Challenges, and Future Directions
  13. طراحی سامانه تصمیم‌یار هوشمند برای تخمین سطح تهدید در مناطق درگیر با استفاده از الگوریتم‌های یادگیری ماشین
  14. چارچوب‌های سیاست‌گذاری و چالش‌های پیاده‌سازی هوش مصنوعی در صنعت سلامت: رویکرد مروری بر جنبه‌های جهانی و ملی
  15. Exploring Machine Learning Algorithms for Damage Detection in Vibration- and Vision-Based Structural Health Monitoring