جستجو
The Stabilisation Paradox in Hot-Arid Earthen Architecture
Amin Dastmardi1 Amir Dastmardi2
Abstract :
Unfired earthen materials — adobe, rammed earth, and compressed earth blocks — carry among the lowest embodied-carbon footprints of any structural walling system, a property that matters most precisely where it is least exploited: in hot-arid regions facing both rapid construction growth and mounting pressure to decarbonise. Yet raw earth has real limitations. Moisture erosion, variable compressive strength, and code-compliance requirements routinely push designers toward stabilising it with Portland cement, and this is where the trouble starts: the same intervention that makes earthen walls structurally acceptable also erodes the environmental case for building with earth in the first place. This paper synthesises evidence from seven peer-reviewed life cycle assessment studies to size this trade-off precisely. The pattern is stark. Adding 8–10% cement by mass raises the embodied carbon of rammed earth from a baseline of 25–35 kgCO₂/m³ to 140–200 kgCO₂/m³, a four-to-six-fold increase that a separate, independent review of 132 studies confirms in relative terms. At that stabilisation level, rammed earth no longer outperforms ordinary fired clay brick on carbon — it simply becomes another masonry option. Recent work from Egypt and Australia points toward a way out: construction and demolition waste, calcium oxide, and natural fibre reinforcement can deliver comparable structural performance without the same carbon penalty. The paper argues that building codes in hot-arid regions, by specifying compressive strength without recognising these alternatives, default designers into the most carbon-intensive stabilisation pathway available, and closes with recommendations for performance-based code reform and further research on low-carbon binders.
Keywords : earthen architecture embodied carbon stabilisation life cycle assessment hot arid climate
زبان مقاله : انگلیسی
محور مقاله : مهندسی معماری و توسعه پایدار
محل انتشار : چهارمین کنفرانس بین المللی پژوهش های کاربردی در مهندسی عمران، معماری و شهرسازی
آدرس وب سایت کنفرانس : icarcau.com
کد IOI مقاله : ABKD-ABHHDD
لینک مستقیم مقاله : https://isnac.ir/ABKD-ABHHDD
نمایش چکیده فارسی
: https://isnac.ir/SA/ABKD-ABHHDD
سایر مقالات ارائه دهنده
سایر مقالات محل انتشار
- بررسی نقش ظرفیت اکولوژیکی شهری در تحقق عدالت فضایی و محیطزیستی
- الومینیوم اکسید ونقش ان بر پخت کلینکر
- Adaptive Integrated Land Management Framework (AILMF): A Data-Driven Model for Optimizing Land Uses in Iran s Arid and Semi-Arid Regions
- An insight into the Iranian garden design (A Nexus of Social Interaction, Cultural Exchange)
- تحلیل راهبردهای طراحی فضاهای سبز پایدار در پارکهای حاشیه شهری و نقش مدیریت شهرداری در تحقق پایداری زیستمحیطی
- بررسی اهمیت ادراک بصری در کالبد شهری با رویکرد معماری پایدار
- بررسی نقش فناوری نانو و مدل سازی اطلاعات ساختمان در مدیریت تدارکات در پروژههای ساخت و ساز برای دستیابی به اهداف توسعه پایدار
- بررسی رویکردهای نوین در طراحی ساختمان های موقت پایدار برای مناطق پس از جنگ در استان قم.
- بستر سازی مناسب در طراحی فضاهای کودک محور برای ارتقا خلاقیت
- بررسی میزان صرفه جویی زمانی ناشی از کاربرد فناوری پیش ساختگی در ساختمان سازی
- تدوين مولفه هاى كالبدى در ارتقاى سرزندگى محيطى در فضاهاى باز و بسته (مطالعه موردى: مجتمع هاى تجارى-تفريحى)
- مدیریت دمایی و کنترل ترک خوردگی بتن حجیم در سازههای هیدرولیکی؛ مطالعه موردی پروژه جمع آوری آبهای سطحی و کنترل سیلاب معدن مس سونگون
- Zero-Carbon Architecture Strategies: Vernacular Insights in Iranian Hot Arid Climate
- بهینهسازی چندهدفه سایهبانهای پنجره با رویکرد تقابل نور روز و مصرف انرژی در اقلیم گرم و خشک (مطالعه موردی: ساختمانهای اداری اصفهان)
- بررسی نقش اصول بیوفیلیک در طراحی مدارس ابتدایی با هدف ارتقای خلاقیت کودکان