نمایش چکیده فارسی

Investigating the effect of simultaneous ultrasonic vibration of tool and addition of Carbon Nanotube into the dielectric on machining characteristics and suface integrity of Ti-6Al-4V alloy in EDM process

Mohammadreza shabgard1 Behnam khosrozadeh2

Abstract :
Carbon nanotubes (CNTs) have been used in various fields of research due to their unique properties. In this study multi-wall carbon nanotubes are added to the dielectric used in the EDM and ultrasonic assisted EDM process to evaluate its performance when machining the Ti-6Al-4V alloy, by means of copper electrodes. The effect of adding CNT powders to the dielectric and applying ultrasonic vibration to tool on the material removal rate, tool wear ratio and surface integrity of the work piece were investigated. It is found that addition of multi-walled carbon nanotubes in dielectric shows significant improvement in machining stability; reduces material removal rate and too wear ratio. Ultrasonic assisted EDM processes increases MRR and TWR. The results clearly showed that addition of CNT particle has decreased the surface roughness and vibration of tool with ultrasonic frequency deteriorates surface roughness. Applying ultrasonic vibration to tool and adding CNT powder to dielectric reduce length and width of surface cracks and depth of metal altered zone. Surface conditions in terms of Surface cracks and metal altered zone are very favorable in CNT added dielectric ultrasonic assisted EDM process.

Keywords : carbon nano tube ti 6al 4v pmedm usedm surface integrity


زبان مقاله : انگلیسی
محور مقاله : علوم مهندسی
محل انتشار : کنفرانس بین المللی علوم و مهندسی
آدرس وب سایت کنفرانس : icesconf.com
کد IOI مقاله : XYCC-ABKCB
لینک مستقیم مقاله : https://isnac.ir/XYCC-ABKCB
نمایش چکیده فارسی : https://isnac.ir/SA/XYCC-ABKCB

سایر مقالات محل انتشار
  1. بررسی سبک های معماری مساجد معاصراهل سنت شهر زاهدان
  2. افزایش بهره وری چاه مخازن گازمیعانی با‎ ‎استفاده از روش تغییرترشوندگی در میدان مشترک پارس جنوبی-شمال قطر
  3. طراحي يك سيستم خبره براي تشخيص سرطان حلق
  4. بررسی پلی مورفیسم ژنتیکی (T3801C) , (A2455G) ژن cyp1a1 در یک جمعیت مبتلا به سرطان تخمدان در استان مازندران
  5. بررسي رابطه بين فرهنگ سازماني و تعلق سازماني در بین کارکنان شركت گاز استان خوزستان
  6. تاثیر آموزش هوش هیجانی بر اضطراب امتحان ، خودکارآمدی و عملکرد تحصیلی دانش آموزان با پدران طرح اقماری دبیرستان های مجتمع آموزشی غیر دولتی شهدای ملی حفاری در اهواز
  7. بررسي اجمالي طرح احداث تونل طويل ريلي البرز
  8. به صدا درآمدن زنگ خطر شبکه های ماهواره ای: سبک زندگی جوانان ایران در حال تغییر است!
  9. بینش دبیران وفراگیران ایرانی درس انگلیسی به عنوان زبان خارجی نسبت به راهبرد های انگیزشی
  10. همنشيني رنگ ها در تزئينات كاشيكاري بناي مسجد نصيرالملك شيراز
  11. مروری بر ویژگی‌ها و کاربردهای فناوری‌ رایانش ابری
  12. مقاوم سازی قاب های فلزی موجود با استفاده از بادبندهای شکل پذیر
  13. تحلیل مقابله‌ای اصطلاحات مربوط به بدن در انگلیسی و فارسی از نظر معنایی، واژگانی و ویژگی‌های عاطفی
  14. ارزیابی مقاومت تک محوری، تخلخل،عدد لس انجلس سنگ ها با استفاده از متدهای شبکه های عصبی و حداقل مربعات معمولی
  15. تاثیر میزان جلبک و مواد معلق موجود در آب آبیاری بر عملکرد فیلترهای دیسکی