جستجو
Piezoelectric Response and Fibroblast Adhesion in BaTiO₃/ZnO-PVA/CMCS Hydrogel
Asma Salimi1 Zahra Mohammadi2
Abstract :
Chronic wounds remain a major challenge in tissue repair, partly because traditional dressings primarily provide passive protection and do not actively respond to the electrical microenvironment of injured tissue. This study aimed to develop and characterize a piezoelectric nanocomposite hydrogel based on polyvinyl alcohol/carboxymethyl chitosan (PVA/CMCS) for potential use as an electroactive wound dressing. The hydrogel was reinforced with 5 wt% barium titanate (BaTiO₃) and 10 wt% zinc oxide (ZnO) nanoparticles and fabricated through repeated freeze–thaw cycles followed by CaCl₂ treatment. Nanoparticle incorporation substantially altered the mechanical properties, increasing the compressive modulus from 0.244 MPa for the blank PVA/CMCS hydrogel to 21.70 MPa for the nanocomposite, corresponding to an approximately 89-fold increase. In contrast, the strain at maximum stress decreased from 78.74% to 5.36%, indicating a markedly stiffer and less deformable structure. Under cyclic compression, the nanocomposite exhibited a repeatable electromechanical response, with an average peak-to-peak voltage of 194.0 ± 47.0 mV and an RMS output of 13.0 ± 0.1 mV. The generated electrical response was within the range of electrical potentials discussed for wound-healing environments, although the measurements were obtained under controlled laboratory compression. Indirect MTT assays using L929 fibroblasts showed cell viability across the tested extract concentrations and exposure times. SEM observations further demonstrated fibroblast attachment and spreading, with cellular extensions contacting the hydrogel surface. Overall, BaTiO₃/ZnO incorporation enhanced the stiffness of the PVA/CMCS hydrogel while providing a repeatable electromechanical response and supporting fibroblast attachment under the tested conditions, highlighting its potential for further investigation as an electroactive wound dressing.
Keywords : piezoelectric hydrogel barium titanate zinc oxide electroactive wound dressing fibroblast adhesion
زبان مقاله : انگلیسی
محور مقاله : مهندسی پزشکی
محل انتشار : چهارمین کنفرانس بین المللی پیشرفت های اخیر در مهندسی، نوآوری و تکنولوژی - بلژیک
آدرس وب سایت کنفرانس : eitconf.com
کد IOI مقاله : ABEB-ACZFAH
لینک مستقیم مقاله : https://isnac.ir/ABEB-ACZFAH
سایر مقالات محل انتشار
- سنجش رفتار میرایی رسهای نمکی تحت تحرکات دینامیکی: مطالعه موردی جزیره هرمز
- کاربرد فناوری بالک چیکن در ردیابی و شفاف سازی زنجیره غذایی برای افزایش ایمنی واعتماد مصرف کننده با استفاده از الگوریتم کندوی عسل
- زیبایی شناسی و خلاقیت در استدلال ریاضی: تحلیلی بر اثبات و اندیشه غیررسمی در تحقیقات دکتری
- The Role of the Root System in Flowering
- Effect of Nutrition on the Root System in Strawberry Plants
- تدوین الگوهای طراحی معماری برای ارتقای هویت اجتماعی زنان در مراکز فرهنگی شهری؛ مطالعه موردی: چند فرهنگسرای منتخب شهر تهران
- Application of Machine Learning in Analyzing Managerial and Environmental Factors Influencing the Development of Emerging Sports (Case Study: Fusion Fitness)
- ارتقاء ایمنی در صنعت ساخت با تکیهبر فناوریهای نوین: ابزارها، دستاوردها و چالشهای استقرار
- رویکرد یکپارچه فناوریهای هوشمند و مدیریت کنترل پروژه برای کاهش ریسک در سیستمهای تحت فشار سنگین صنایع استراتژیک
- Finite Element Assessment and Experimental Validation of an Aluminum L-Bracket Under Static, Thermal, and Harmonic Loading
- Nano-Delivered CRISPR/Cas9 for Cancer Therapy: Targeting Tumorigenic Genes through Epigenetic Modulation and Pathway Disruption
- Gold Nanoparticle‑Assisted Hyperthermia for Cancer Treatment: Current Methods, Challenges, and Future Directions
- طراحی سامانه تصمیمیار هوشمند برای تخمین سطح تهدید در مناطق درگیر با استفاده از الگوریتمهای یادگیری ماشین
- چارچوبهای سیاستگذاری و چالشهای پیادهسازی هوش مصنوعی در صنعت سلامت: رویکرد مروری بر جنبههای جهانی و ملی
- Exploring Machine Learning Algorithms for Damage Detection in Vibration- and Vision-Based Structural Health Monitoring