جستجو
Reuse (Recycling) of Concrete Structural Elements – Assessment and Quality Assurance for Service Life
Maziyar Saeidi Mehrvarz1
Abstract :
The use of separate elements in new buildings can be one of the solutions that helps the cycle through the structure. To ensure greater use of renewable energy, RISE provides an expertise for the design of existing buildings and the selection of appropriate elements for renewed development, which includes a code of practice So for separation, care and proportion should be close.
However, one of the main obstacles to the increased use of renewable concrete is the lack of certainty in terms of the useful life of the remaining concrete elements and the assessment of their quality over the future service life of a building It s new. This paper analyzes the chemical analysis of materials and equipment that are tested non-corrosive in the field with traditional laboratory tests of samples extracted from the equipment. The results of this trend also challenge the support of foreign decision-making about new uses and the technical basis for the design of new buildings.
It is caused by different mechanisms of corrosion and corrosion of steel that affect the structural conditions of residential and administrative buildings. To estimate the impact of the destructive factors, theoretical models have been studied and the remaining useful life has been estimated using a simple approach It provides inappropriate messages from material degradation.
The proposal was validated by the results of a pilot project in which real buildings in Stockholm and Uppsala, Sweden, were ready or used for new use in different degrees. The buildings subjected to the financial analysis had different uses (residential, administrative, parking) and different structures (prefabricated elements and six-grade concrete) and represented a large number of the Swedish Building Reserve. One of the buildings was previously separated and the pre-fabricated elements, including the pre-fabricated ones, were successfully replaced by a new administrative building with new uses.
Based on these experiments, a simple elementary quality layer system has been proposed for new uses that has three basic parameters: calculator lifetime, consumption balance and target class. This system is not a perfect proposal and should be considered by a wider group of market players for different types of elements and structures.
Keywords : concrete reuse (recycling) deterioration corrosion service life
زبان مقاله : انگلیسی
محور مقاله : مهندسی عمران و توسعه پایدار
محل انتشار : دوازدهمین کنگره سالانه بین المللی عمران، معماری، هنر و توسعه شهری
آدرس وب سایت کنفرانس : 12icsau.ir
کد IOI مقاله : ABFG-ACZKAA
لینک مستقیم مقاله : https://isnac.ir/ABFG-ACZKAA
نمایش چکیده فارسی
: https://isnac.ir/SA/ABFG-ACZKAA
سایر مقالات ارائه دهنده
- Compare the number of concrete columns reinforced with fiber concrete layers and reinforced concrete
- Optimal design algorithm for seismic retrofitting of reinforced concrete columns using steel cladding method
- Development of a new design approach for reinforced concrete structures based on the strength reduction method
- Effect of Glass Powder and Fibers as a Partial Replacement for Fine Aggregates on the Properties of Basalt-Reinforced Concrete
- Reuse (Recycling) of Concrete Structural Elements – Assessment and Quality Assurance for Service Life
سایر مقالات محل انتشار
- مدیریت ریسک و بحران و راه کار های ایجاد مدیریت جامع بحران
- بررسی فرشهای مینیاتور های کتاب خمسه نظامی
- تلفیق هنرهای صناعی، تجسمی و کاربردی سنتی و مدرن: هویت بصری و معمارانه در بستر پژوهش و مطالعات آکادمیک
- نستعلیق بهمثابه دارایی فرهنگی تحلیل اقتصاد هنر، سرمایۀ نمادین و پویایی بازارِ آثار خوشنویسی
- از نستعلیق تا آبستره: شاعرانگی رنگ، فرم و فضا در نقاشیخط معاصر ایران با اکریلیک
- نقش فرهنگ در شکل دهی به فضاهای تقاطعی شهری:بررسی میدان ها به عنوان کانون های اجتماعی و فرهنگی(نمونه موردی میدان اسبی عظیمیه کرج)
- ارزیابی ایمنی و کیفیت مسیرهای دوچرخه شهری و ارئه راهکارهای بهیوداستفاده شهروندان ؛مطالعه موردی شهر کرج
- تأثیر عکاسی معماری بر ادراک و بازنمایی هویت فرهنگی بناهای تاریخی (مطالعه موردی: بازار تاریخی تبریز، ارگ علیشاه و مسجد کبود)
- خوانش معماری از طریق عکاسی: بررسی تأثیر نور، قاببندی و پرسپکتیو بر ادراک فضا در نمونههایی از معماری تاریخی و معاصر ایران
- تحلیل مؤلفههای شکلدهنده مکان در مسجد جامع ابرکوه با تأکید بر نظریه پدیدارشناسی مکان نوربرگشولتز
- طراحی و ارزیابی یک چارچوب تعاملی مبتنی بر هوش مصنوعی مولد برای تولید، ارزیابی و بهبود تدریجی فرم ساختمانهای بلندمرتبه
- تحلیل تطبیقی عملکرد ابزارهای هوش مصنوعی مولد در فرآیند تولید، ارزیابی و بهینهسازی فرم ساختمانهای بلندمرتبه
- تدوین الگوی طراحی کالبدی فضاهای پیادهمدار مبتنی بر بازتولید آیینهای گذری و خاطره جمعی(نمونه موردی:پیادهراه فرهنگی رشت)
- واکاوی مورفولوژیک هویت بصری هنر اسلامی در گذار از هندسه سنتی به انتزاع معاصر
- تحلیل دیالکتیک انسان و محیط و نقش حس مکان در خودشناسی عاطفی و هویت سکونتی ساکنان مسکن معاصر مطالعه موردی: شهر جدید امیرکبیر