نمایش چکیده فارسی

Evaluation and comparison of induction motor drives fed with pulse width modulation and vector control to investigate total harmonic distortion in the current and voltage waveform

Heshmatallah Nourizadeh1

Abstract :
The importance of harmonics in power systems has been increased significantly by increasing nonlinear load, and other devices of high frequency generation. In the meantime, induction motors are one of the main equipment in distribution networks that its harmonic analysis has a great importance. In this regard, in this study, we analyze, evaluate and model the effects of the harmonic deviation of total current and voltage on the optimum controllers of induction motors with adjustable AC drives using the Pulse Width Modulation (PWM) and the vector control method. And according to the type of control (pulse width modulation or vector), the harmonics currents and voltages are compared. In this study, Park transform is used to control the rotor flow and a two-axis system is formed by transforming the three-phase to two-phase system, this action is possible by using it and modifying the torque and flux vector. FFT analysis was used in MATLAB software environment to determine total harmonic distortion (THD) related to current and voltage. Different strategies of pulse width modulation (PWM) and vector control have been experimentally implemented on three-phase 460 V, 50 hp, 60 Hz induction motors. The simulation results show the efficiency of the vector control method in reducing the total harmonic distortion in the drives.

Keywords : voltage and current harmonic induction motor pulse width modulation (pwm) vector control total harmonic distortion (thd)


زبان مقاله : انگلیسی
محور مقاله : گروه مهندسی برق
محل انتشار : دومین کنفرانس مکانیک،مهندسی برق و کامپیوتر ایتالیا
آدرس وب سایت کنفرانس : mecconf.com/2nd
کد IOI مقاله : XCBC-EGAKD
لینک مستقیم مقاله : https://isnac.ir/XCBC-EGAKD
نمایش چکیده فارسی : https://isnac.ir/SA/XCBC-EGAKD

سایر مقالات محل انتشار
  1. طراحی و شبیه سازی انتن نیم دایره ی دوبل در محدوده ی فرکانسی 5 تا 15 گیگاهرتز
  2. بررسی هوش مصنوعی در بهداشت و درمان
  3. طراحی کنترل کننده تحمل پذیر عیب عملگر در سیستم کوادروتور در حالت شناور
  4. جایابی چند منظوره بهینه ی پست های توزیع با در نظر گرفتن قابلیت اطمینان با استفاده از الگوریتم جستجوی موجودات همزیست (SOS)
  5. بهينه‌سازي مصرف انرژي در شبكه‌هاي حسگر بی سیم برمبناي الگوريتم‌هاي مسيريابي با استفاده از اتوماتاي يادگير سلولي
  6. ارائه یک مدل تصمیم‌گیری شناختی بر اساس عامل (SOAR)
  7. تشخیص و جداسازی عیب‌های چند عملگر با استفاده از فیلترکالمن توسعه یافته در سیستم کوادروتور در حالت شناور در یک نقطه
  8. Active Fault Tolerant Control for a Multi-Actuator fault of Quadrotor System in Hovering Mode
  9. مدل‌سازی و تحلیل عددی جریان اطراف ایرفویل متقارن NACA0012 تحت زوایای حمله مختلف با استفاده از روش مدل‌سازی K.ω SST
  10. ارائه راهکارهای مبتنی بر مسیریابی ccrبمنظورکاهش تاخیر درحمل ونقل شهری دربستراینترنت اشیا
  11. بررسی تاثیر امواج الکترومغناطیس تلفن همراه بر روی چشم انسان
  12. معضل ناامنی اینترنت اشیاء در دستگاههای IOT
  13. Numerical Modeling and Optimization of Superheater with Genetic Algorithm
  14. کنترل بهینه ی ربات های صنعتی مبتنی بر رویتگر با استفاده از الگوریتم رقابت استعماری
  15. تشخیص پوسیدگی دندان با استفاده از یادگیری ماشین