نمایش چکیده فارسی

Effect aluminum oxide nanofluid on the heat transfer of shell and tube heat exchanger

Saeid Majdnia1 Mehdi Nakisa2

Abstract :
In this research, a numerical study of the effect of the use of water-aluminum oxide nanofluid on the heat transfer rate and pressure drop of the shell and tube heat exchanger has been done. For this purpose, computational fluid dynamics method and AnsysFluent commercial software have been used. The effect of Reynolds number and the volume fraction of nanoparticles in the base fluid on the increase in heat transfer, increase in pressure drop and the efficiency of the heat exchanger have been studied. The results show that the addition of nanofluid to the base fluid can significantly improve the heat transfer rate and heat exchanger efficiency. Also, the results show that as the Reynolds number increases and the flow becomes more turbulent, the amount of heat transfer also increases. The results show that if the goal is to use a flow with a Reynolds number of 6000, the use of nanofluid with a volume fraction of 1% and 2% is more optimal. For flow with Reynolds number of 7500, the use of nanofluid with a volume fraction of 3% is optimal. There is no justification for using nano fluid with a volume fraction of 4%. The results show that the best calculated efficiency factor is equal to 1.89, which is obtained for a Reynolds number of 7500 and a volume fraction of 3%. The lowest PEC coefficients are generally related to pure water fluid.

Keywords : nano fluid heat transfer shell and tube heat exchanger aluminum oxide


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : دومین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/2nd
کد IOI مقاله : XKDK-AZCHDD
لینک مستقیم مقاله : https://isnac.ir/XKDK-AZCHDD
نمایش چکیده فارسی : https://isnac.ir/SA/XKDK-AZCHDD

سایر مقالات ارائه دهنده
  1. بررسی عددی انتقال حرارت نانو سیال در لوله مارپیچ
  2. بررسی عددی بهبود کیفیت جداسازی فازهای گاز طبیعی
  3. شبیه سازی عددی فرایند مایع سازی هوا
  4. شبیه سازی عددی ذخیره سازی انرژی حرارتی با استفاده از ماده ی تغییر فاز دهنده
  5. افزایش بازدهی توربین گازی با استفاده از چیلر جذبی تغذیه شونده از دود اگزوز
  6. تحلیل عددی افزایش راندمان موتور هوایی شبه توربینی با استفاده از دینامیک سیالات محاسباتی
  7. بهینه سازی اقتصادی انرژی و اگزرژی در چرخۀ توربین گاز با گرمایش مجدد سیکل رانکين
  8. مدل سازی عددی دیوار خورشیدی با استفاده از مواد تغییر فاز دهنده
  9. شبیه سازی عددی فرایند مایع سازی هوا
  10. شبیه سازی عددی ذخیره سازی انرژی حرارتی با استفاده از ماده ی تغییر فاز دهنده
  11. Numerical investigation of non-Newtonian fluid flow in channels with local expansion
  12. Numerical Investigation of Non-Newtonian Nanofluid Flow in Spiral Pipe
  13. Thermo-economic survey on solar CCHP system using solar panels
  14. Increasing biogas production in municipal landfill by waste separation and use of methane gas hydrogen in fuel cells for electricity and heat generation
  15. Numerical modeling of nano-fluid flow inside a spiral micro-tube