نمایش چکیده فارسی

Design and Simulation of a Differential Mechanism for a Robotic Hand Prosthesis with Independent Control and Optimal Force Distribution among Fingers and Thumb

IMAN NASIRI1 MOSTAFA GHAYOUR2 MOHAMMAD DANESH3

Abstract :
In recent years, the development of robotic hand prosthesis systems aimed at restoring motor functions and improving the quality of life for individuals with limb loss has emerged as a leading field in biomedical engineering. In the present study, a novel robotic hand prosthesis mechanism utilizing a differential force distribution system and a solenoid-based locking mechanism was designed and simulated to achieve more precise and natural control over finger and wrist movements. To reduce weight and enhance efficiency, a under-actuated mechanism was employed in the finger design, and the geometric dimensions were extracted based on the anatomical structure of a human hand. For the thumb, two separate actuators were incorporated at the CMC joint to facilitate both flexion and rotational movements, thereby improving opposability and object grasping capability. The solenoid’s magnetic field and optimal activation current were simulated using COMSOL Multiphysics. Furthermore, dynamic simulations were conducted to analyze hand movements including fist formation, pointing (extension of the index finger while the other fingers remain flexed), flexion of the ring and little fingers, thumb flexion, and wrist rotation. The results demonstrated that the proposed differential mechanism effectively distributes forces uniformly among the fingers, while the solenoid-based locking system allows the user to selectively activate desired fingers. The measured ranges of motion (ROM) for the MCP, PIP, and DIP joints were 78°, 95°, and 60°, respectively, and for the thumb joints were 90°, 38°, and 30°, showing good conformity with natural human hand movements. Overall, the proposed design—with reduced number of actuators, lower weight, intelligent force distribution, and independent finger control—represents a significant advancement toward next-generation prosthetic hands with performance closely resembling that of a natural human hand.

Keywords : robotic hand prosthesis differential mechanism artificial neural network fuzzy control


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : سومین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/3rd
کد IOI مقاله : AADK-AAHGFG
لینک مستقیم مقاله : https://isnac.ir/AADK-AAHGFG
نمایش چکیده فارسی : https://isnac.ir/SA/AADK-AAHGFG

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
  1. مروری بر تکنیک های استخراج و رویکردهای تحلیلی برای تشخیص آفت کش ها در محصولات غذایی
  2. مروری بر فناوری های حسگر برای تشخیص باقیمانده آفت کش ها در مواد غذایی
  3. کاربرد راهبردهای بازاریابی در توسعه بازار و تجاری‌سازی فناوری‌های نوظهور: مطالعه‌ موردی شرکت نانوسیس در صنعت فناوری نانو
  4. بررسی میزان بیان miR143 و miR183 موثر بر ژن هدف RICTOR و بررسی کلینیکو پاتولوژی نمونه¬ها در بافت¬های بلوک پارافینه آدنو کارسینومای معده
  5. عنوان :نقش فرهنگ سازمانی در بهینه‌سازی مدیریت دانش در مؤسسات آموزشی: چالش‌ها و راهکارها
  6. مهندسی متابولیک میکروارگانیسم‌ها برای تولید داروهای آنتی‌سرطانی طبیعی: از ژن تا محصول
  7. پیش‌بینی‌های مصرف انرژی خانگی به عنوان اصلی ترین منابع مصرفی در حوزه اقتصاد انرژی از طریق مدل یادگیری ماشین
  8. بررسی استفاده از بیوفیلم‌های باکتریایی مهندسی‌شده در تولید بیوالکترودهای زیستی برای پیل‌های سوختی میکروبی
  9. بهینه‌سازی مصرف انرژی ساختمان در اقلیم سرد تبریز با سیستم هیبریدی خورشیدی– بادی: پاسخی نو به ناترازی انرژی در مناطق کوهستانی
  10. شناسایی مکان های بهینه برای احداث پارک های محله ای در منطقه 11 شهرداری تهران
  11. بررسی مولفه‌های کلیدی معماری سبز در ساختمان‌های مسکونی مبتنی بر بهینه سازی مصرف انرژی و ارتقاء پایداری زیست محیطی
  12. استفاده از یادگیری ماشین و هوش مصنوعی در صنعت نفت (اکتشاف، استخراج، بهره برداری مخزن)
  13. A review of the removal of dye pollutions in water and its effect on human and aquatic health
  14. کاربرد فناوری‌های نوین در ارتقاء پایداری محیطی و حس تعلق در شهرهای جدید (با تأکید بر شهرهای جدید ایران)
  15. Implementation of Hypnosis in Sports Setups Based on Performance Improvement