نمایش چکیده فارسی

Simulation of Forming Limit Diagrams for Multilayer AL 7075-T6 and Copper Sheets Using the Johnson–Cook Failure Criterion

AMIR HOSEIN AMOOCHI1

Abstract :
In this study, the formability of multilayer Al7075 T6/Cu sheets with 2-, 4-, 8-, and 16-layer configurations was investigated under the Johnson–Cook failure criterion using forming limit diagram (FLD) tests and numerical simulations in Abaqus. The results indicated that with an increasing number of layers, the major strain (ε1_max) decreased while the minor strain (ε2_max) increased, reflecting a transition from uniaxial to biaxial stress states in thicker layers. The absorbed energy and overall strength of the specimens increased with the number of layers, but the overall ductility decreased. Stress analysis and interfacial parameter evaluation revealed improved stress distribution, although strain localization at the interfaces increased, raising the risk of interfacial delamination. Abaqus simulations using the Johnson–Cook model showed good agreement with experimental results and highlighted that controlling interfacial parameters and precise model calibration are crucial for predicting the behavior of multilayer sheets. The findings are valuable for the optimal design of robust laminated sheets and failure prediction in industrial applications such as aerospace and automotive engineering.

Keywords : forming limit diagram (fld) al7075 t6/cu laminated sheets johnson cook damage model multilayer metal sheet finite element analysis (fea) formability


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : سومین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/3rd
کد IOI مقاله : AADK-AAKZDC
لینک مستقیم مقاله : https://isnac.ir/AADK-AAKZDC
نمایش چکیده فارسی : https://isnac.ir/SA/AADK-AAKZDC

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
  1. مروری بر تکنیک های استخراج و رویکردهای تحلیلی برای تشخیص آفت کش ها در محصولات غذایی
  2. مروری بر فناوری های حسگر برای تشخیص باقیمانده آفت کش ها در مواد غذایی
  3. کاربرد راهبردهای بازاریابی در توسعه بازار و تجاری‌سازی فناوری‌های نوظهور: مطالعه‌ موردی شرکت نانوسیس در صنعت فناوری نانو
  4. بررسی میزان بیان miR143 و miR183 موثر بر ژن هدف RICTOR و بررسی کلینیکو پاتولوژی نمونه¬ها در بافت¬های بلوک پارافینه آدنو کارسینومای معده
  5. عنوان :نقش فرهنگ سازمانی در بهینه‌سازی مدیریت دانش در مؤسسات آموزشی: چالش‌ها و راهکارها
  6. مهندسی متابولیک میکروارگانیسم‌ها برای تولید داروهای آنتی‌سرطانی طبیعی: از ژن تا محصول
  7. پیش‌بینی‌های مصرف انرژی خانگی به عنوان اصلی ترین منابع مصرفی در حوزه اقتصاد انرژی از طریق مدل یادگیری ماشین
  8. بررسی استفاده از بیوفیلم‌های باکتریایی مهندسی‌شده در تولید بیوالکترودهای زیستی برای پیل‌های سوختی میکروبی
  9. بهینه‌سازی مصرف انرژی ساختمان در اقلیم سرد تبریز با سیستم هیبریدی خورشیدی– بادی: پاسخی نو به ناترازی انرژی در مناطق کوهستانی
  10. شناسایی مکان های بهینه برای احداث پارک های محله ای در منطقه 11 شهرداری تهران
  11. بررسی مولفه‌های کلیدی معماری سبز در ساختمان‌های مسکونی مبتنی بر بهینه سازی مصرف انرژی و ارتقاء پایداری زیست محیطی
  12. استفاده از یادگیری ماشین و هوش مصنوعی در صنعت نفت (اکتشاف، استخراج، بهره برداری مخزن)
  13. A review of the removal of dye pollutions in water and its effect on human and aquatic health
  14. کاربرد فناوری‌های نوین در ارتقاء پایداری محیطی و حس تعلق در شهرهای جدید (با تأکید بر شهرهای جدید ایران)
  15. Implementation of Hypnosis in Sports Setups Based on Performance Improvement