نمایش چکیده فارسی

FESEM Analysis and X-Ray EDS Based on the Synthesis and Production of Nano Biochar to Reduce the Amount of Lead Heavy Metal from Water

SOLMAZ SAFARI1

Abstract :
The presence of heavy metals in the environment is one of the concerns of industrialized countries. These metals directly or indirectly affect the human body. For example, the heavy metal lead, if it exceeds the global standard, can cause cancer, anemia, and damage to the brain and immune system. In this research, after producing a sample of biochar from dried wood of a fruit tree by heat treatment at 550 degrees Celsius and then synthesizing nano-biochar with a mechanical grinder at speeds of 550 and 610 rpm, in three times of 3, 5 and 8 hours and the number of pellets is 1 is 10: the particle size range (30.8-30.7-30.8) was obtained. Finally, after adding lead to pure distilled water, the amount of absorption was calculated. The results of field emission scanning electron microscopy and X-ray energy diffraction spectroscopy were used in this research.

Keywords : heavy metals nano biochar x ray energy diffraction spectroscopy atomic force microscope nano technology


زبان مقاله : انگلیسی
محور مقاله : مهندسی مواد
محل انتشار : سومین کنفرانس بین المللی پژوهش ها و دستاوردهای نو در علوم، مهندسی و فناوری های نوین
آدرس وب سایت کنفرانس : setbconf.com/3rd
کد IOI مقاله : XHCC-KFGGD
لینک مستقیم مقاله : https://isnac.ir/XHCC-KFGGD
نمایش چکیده فارسی : https://isnac.ir/SA/XHCC-KFGGD

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties