Enhancing the Performance of Polyacrylonitrile (PAN) Ultrafiltration Membranes via Alkaline Hydrolysis: Effect of Polymer and NaOH Concentrations

Ghazaleh Jafariderazkolaei1 Mohsen Taghavijeloudar2

Abstract :
Polyacrylonitrile (PAN) is one of the most widely used polymeric materials for ultrafiltration (UF) membranes because of its excellent chemical stability, mechanical strength, and ease of fabrication. However, the intrinsic hydrophobicity of PAN limits its water permeability and increases its susceptibility to membrane fouling. In the present study, the performance of PAN ultrafiltration membranes was improved through alkaline hydrolysis using sodium hydroxide (NaOH). Initially, flat-sheet PAN membranes containing 10, 11, 12, and 13 wt% polymer were fabricated via the non-solvent induced phase separation (NIPS) technique. The fabricated membranes were subsequently hydrolyzed using 2 and 4 wt% NaOH solutions to enhance their surface hydrophilicity. The influence of polymer concentration and hydrolysis conditions on membrane wettability and filtration performance was systematically investigated by measuring water contact angle and pure water flux.The results revealed that membrane properties were strongly dependent on both PAN concentration and hydrolysis conditions. Among the pristine membranes, the membrane prepared with 12 wt% PAN exhibited the most favorable balance between membrane morphology and water permeability with flux of 47.8 LMH. Following alkaline hydrolysis, a significant reduction in water contact angle accompanied by an increase in pure water flux was observed, confirming the successful enhancement of membrane hydrophilicity. The membrane hydrolyzed in 4 wt% NaOH showed the lowest contact angle (approximately 26°) and the highest pure water flux of 73.5 LMH, indicating the optimum hydrolysis condition among the investigated samples. The enhanced hydrophilicity is also expected to improve the membrane s resistance to fouling by reducing interactions between the membrane surface and potential foulants.Overall, this study demonstrates that alkaline hydrolysis is a simple, cost-effective, and scalable surface modification strategy for improving the hydrophilicity and permeability of PAN ultrafiltration membranes, providing a promising approach for water treatment applications.

Keywords : polyacrylonitrile ultrafiltration membrane alkaline hydrolysis sodium hydroxide hydrophilicity contact angle pure water flux


زبان مقاله : انگلیسی
محور مقاله : مهندسی محیط زیست و محیط زیست شهری
محل انتشار : پنجمین کنگره بین المللی مهندسی عمران ، معماری ، مصالح ساختمانی و محیط زیست
آدرس وب سایت کنفرانس : caucong.com
کد IOI مقاله : ABZE-ABHHZA
لینک مستقیم مقاله : https://isnac.ir/ABZE-ABHHZA

سایر مقالات ارائه دهنده
  1. امکان سنجی استفاده از آب باران به عنوان یک منبع آب تجدید پذیر با استفاده از نقشه های هوایی Google Earth و داده های هواشناسی (مطالعه موردی: شهر تهران)
  2. Municipal wastewater treatment through cultivation of a new strain of microalgae Chlorella sorokiniana pa.91 in flat plate photobioreactor (FP-PBR
  3. Qanat, a sustainable and environmentally friendly system for water resource management in arid area
  4. A novel approach for extraction of high value bio-products from microalgae using surfactants
  5. An investigation on the potential of rainwater harvesting from building’s roof tops in Seoul city, South Korea
  6. Performance evaluation of membrane bioreactor (MBR) for pulp and paper wastewater treatment
  7. Using Ferric chloride (FeCl3) as trace-element to enhance methane production of anaerobic co-digestion
  8. Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
  9. The therapeutical potency of cyanobacterial secondary metabolites compared with chemotherapy against leukemia: Mini-review
  10. Optimization of 4-chlorophenol degradation through ozonation process: Response Surface Methodology (RSM)
  11. A sustainable and environmentally friendly approach for wastewater treatment using natural flocculants: pH effect and optimization
  12. Smart design of a sustainable building with zero water demand: Rainwater harvesting, in situ water and wastewater treatment
  13. Improvement of microalgal-based biological treatment of municipal wastewater by adding ZnCl2 and FeCl2 as trace elements
  14. Sustainable approach for wastewater treatment through microbial fuel cell (MFC): Using wood glue instead of expensive polymeric binders
  15. Optimization of high-value bio-product extraction from microalgae biomass: Effect of temperature and light intensity
سایر مقالات محل انتشار
  1. مدل‌های اقتصادی در برنامه‌ریزی شهری: از تحلیل اقتصادی تا تصمیم‌سازی سیاستی
  2. A Review of Heavy Metal Contamination in Surface Sediments of the Southern Caspian Sea
  3. هضم بیهوازی: گذار از مدیریت پسماند به ابرسیستم انرژی-کشاورزی پایدار
  4. Reclaiming Community: A Study on Quality of Life Improvement in Middle-Income Housing
  5. از شهر خاکستری تا شهر سبز : مدل ترکیبی توسعه پاک بر پایه مهندسی آب و اکولوژی شهری
  6. تحلیل تأثیر تغییرات اقلیم بر معماری بومی مناطق نیمه‌خشک ایران
  7. چالش های رشد داده های مصنوعی موج بعدی در نوآوری داروهای گیاهی
  8. نیاز به صنعتی‌سازی ساختمان‌ها در شهرسازی و ابنیه عمومی شهر
  9. تحلیل ساختار کالبدی-فضایی بافت تاریخی در راستای ارتقاء آسایش اقلیمی: مطالعه‌ای تطبیقی بر الگوهای بومی سازگار با اقلیم (نمونه موردی بافت تاریخی شیراز)
  10. تحلیل و نوآوری در طراحی سازه‌های بتنی و فولادی با رویکرد ژئوتکنیکی
  11. نقش باغ ایرانی در احیای فضاهای شهری معاصر: خوانشی فلسفی از پیوستار طبیعت، معنا و کالبد در پارک پردیسان تهران و باغ سپهر مشهد
  12. بررسی ستون‌ های بتن مسلح تقویت ‌شده به کمک ژاکت فولادی
  13. Transformations of Architectural Expectations in Cinema: From Urban Representation to Futuristic and Organic Architectures
  14. Investigation on the scouring and protecting of downstream of hydraulic structure in river
  15. چگونگی نگارش شفاف یک مقاله ریاضی در مقطع دکترا