نمایش چکیده فارسی

Risk assessment of corrosion in different components of an aerobic bioreactor with incident reporting risk matrix method

Mehrzad Zandieh1

Abstract :
In this novel and applied study, it was investigated risk assessment of corrosion in different components of an aerobic bioreactor with incident reporting risk matrix method. These components included pipe of inlet feed/ related elbow/ related pump, pipe of inlet air/ related fittings and aerator, agitator, bioreactor internal surface, probes sensors and pipe of effluent/ related elbow/ related pump. With for achievement to this this aim, incident reporting risk matrix method, as a very effective method, was used. It was investigated the hazards, their causes and effects. Also, it was identified the occurrence possibilities and severity of consequences. Moreover, risk levels were obtained. It was found that 60% of the risks had probability level of “possible”. Also, 50% of the risks had severity levels of “moderate”. According to results, 50% of the risks had “medium” level as risk importance level. It was proposed prevention and control actions for decreasing and controlling risks.

Keywords : risk assessment corrosion aerobic bioreactor


زبان مقاله : انگلیسی
محور مقاله : موضوعات مرتبط با مهندسی صنایع
محل انتشار : دومین کنفرانس مهندسی صنایع ،اقتصاد و مدیریت ایتالیا
آدرس وب سایت کنفرانس : iemconf.com/2nd
کد IOI مقاله : XCBA-FABBC
لینک مستقیم مقاله : https://isnac.ir/XCBA-FABBC
نمایش چکیده فارسی : https://isnac.ir/SA/XCBA-FABBC

سایر مقالات ارائه دهنده
  1. Investigating and Identifying Hazardous Points in Design of Processes and Parts of a PVC-Based Consumable Medical Sterile Suction Tube Manufacturing Factory with Assessing and Controlling Risks in Design Phase
  2. Investigating Process Risk Assessment and Controlling Risks in Decolorization Process of Colored Aqueous Solution by Advanced Oxidation Process with HAZOP Method
  3. Introducing Three Novel Proposed Models for Process Design of Recovery of Inactivated Refinery Platinum Catalysts
  4. Introducing a novel model for design, development and improvement of fermentation processes and bioreactors of production of biotechnological drugs according to new technologies
  5. A useful and concise overview of important mechanical and physicochemical tests for validation of packaging processes of sterile medical devices according to international standards
  6. Introducing novel applied solutions for resolving corrosion problems and controlling corrosion in refinery and petrochemical industries with using of coatings of novel and advanced materials
  7. Introducing novel proposed process models for purification of air polluted with different organic compounds
  8. Advanced applied models for establishment of HSE-MS in factories related to chemical engineering processes with emphasis on safety of processes
  9. Proposing Novel Method for Medical Devices Sterilization Via a New Reactor Design with Applying Combination of O3/O2/UV Radiation with Rotational Forced Convection Flows
  10. ANFIS modeling a decontamination process from water with MATLAB
  11. مروری مفید و علمی بر روی بخشهای مختلف استاندارد ایزو 14644 (ISO 14644) مختص کلین رومهای به کار رفته در فرآیندهای تولیدی حساس به پارتیکلها و ذرات هوابرد به ویژه در فرآیندهای تولید مواد غذایی, داروسازی و تولید تجهیزات پزشکی
  12. Procedure design of modeling a sterilization reactor with artificial neural network (ANN) using MATLAB
  13. ارائه طرح (Plan) کاربردی برای تجزیه و تحلیل نقاط خطرناک و نقاط کنترل بحرانی فرآیندی در فرآیندهای تولیدی یک کارخانه تولید دمنوشهای گیاهی با استفاده از اصول و رویکردهای HACCP
  14. شناسایی خطرات مرتبط با ایمنی فرآیندهای اکسیداسیون پیشرفته برای تصفیه آبها و پسابها و اقدامات کنترلی لازم برای کنترل خطرات این فرآیندها بر اساس نوع و ماهیت فرآیندها با رویکرد ایمنی و بهداشت
  15. مروری بر پژوهشهای انجام شده در زمینه راکتورهای پلاسمای پرتو الکترون
سایر مقالات محل انتشار
  1. ارزیابی مدیریت کیفیت پروژه بر اساس ترکیب تکنیک های ANP و DEMATEL
  2. شناسایی و اولویت بندی ریسک های موجود در زنجیره تامین با استفاده از روش بهترین_بدترین (مطالعه موردی: صنعت رنگ و رزین)
  3. نقش آموزش هاي فنی و حرفه اي در پیشگیري و کاهش آسیبهاي اجتماعی
  4. طراحي يك رویکرد دو مرحله ای براي تخصيص محصولات به توزيع كنندگان در زنجيره تامين
  5. تعیین الگوی بهینه کشت محصولات زراعی در استان گلستان
  6. بررسی شاخص‌های شیفتگی کارکنان بر اساس مدل شرکت هی گروپ (مطالعه موردی: شرکت نفت و گاز شرق ایران)
  7. Analyzing Relative Importance of Doing business, Economic Freedom, and Competitiveness in increasing the share of High-tech Export: Lessons for Iran
  8. صنعت بازیافت پسماند صنعتی و شهری از منظر مدیریت پسماند
  9. تاثیر مخارج بهداشتی و رشد اقتصادی بر انتشار کربن دی اکسید در ایران
  10. تاثیر توسعه بازار سهام و تورم بر رشد اقتصادی در ایران
  11. مدیریت بحران در مشاغل سازمانی
  12. شناسايي و كاهش هزينه هاي كيفيت محصول و خدمات پس از فروش در شركت ايران خودرو
  13. تاثیر لجستیک معکوس یکپارچه در زنجیره تامین سبز با تاکید بر عوامل محیطی
  14. مزایای به کارگیری SQA در بهبود فرایند تولید با استفاده از یک مطالعه موردی
  15. ارائه ی یک مدل تصمیم‌گیری مبتنی بر روش‌های فرآیند تحلیل شبکه‌ای و تاپسیس با استفاده از نرم افزار سوپر دسیژن برای مسئله‌ی انتخاب سیستم تولید کاغذ سنگ آهک