The effect of crumb rubber on ductility of Soil-Rubber mixture

Milad Tajdini1 Hamidreza Farboodmanesh2

Abstract :
Addition of waste crumb rubber for reinforcing the soils is an appropriate method for improving the strength and bearing capacity of the soils. In addition to the improvement of soil engineering properties, the addition of waste crumb rubber is a measure for the protection of environment. In this study, the shear strength parameters of the Kaolinite clay, as the control material, and the Kaolinite clay reinforced by different percentages of different types of crumb rubber content have been evaluated. The triaxial tests have been conducted on the control and crumb rubber reinforced soils. Results show that the addition of crumb rubber to the soil results in the improvement of shear strength parameters and the ductility of the soil.

Keywords : crumb rubber improvement clay triaxial tests


زبان مقاله : انگلیسی
محور مقاله : مهندسی عمران
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HCGAB
لینک مستقیم مقاله : https://isnac.ir/XEHE-HCGAB

سایر مقالات ارائه دهنده
  1. اثر افزودن نانوسیلیس با سطح ویژه های متفاوت بر روی مقاومت فشاری خاک سیمان (با نگاه به آزمایش ریزساختار مصالح)
  2. تفاوت الیاف مصنوعی و طبیعی در مقاومت کششی مصالح خاک – سیمان (با نگاه به آزمایش ریزساختار مصالح)
  3. اثر افزودن نانوسیلیس با سطح ویژه های متفاوت بر روی نفوذپذیری خاک سیمان (با نگاه به آزمایش ریزساختار مصالح)
  4. تفاوت الیاف مصنوعی و طبیعی در مقاومت فشاری مصالح خاک – سیمان (با نگاه به آزمایش ریزساختار مصالح)
  5. تاثیر پارامترهای خاک و الیاف برروی مقاومت کششی سیمان خاکی بعنوان لایه روسازی راه
  6. تاثیر پارامترهای خاک و نانوسیلیس برروی تراکم سیمان خاکی بعنوان مصالح روسازی راه
  7. تاثیر پارامترهای خاک و الیاف برروی مقاومت خمشی سیمان خاکی بعنوان لایه روسازی راه
  8. An Earthquake model on the tunnel (effect of burial depth)
  9. Shearing of clay with improvement of waste rubber
  10. تاثیر پارامترهای خاک و الیاف برروی تراکم سیمان خاکی بعنوان لایه روسازی راه
  11. تاثیر افزودن خرده لاستیک صنعتی بر مقاومت برشی رس تثبیت شده
  12. تاثیر پارامترهای خاک و نانوسیلس برروی مقاومت برشی سیمان خاکی بعنوان لایه روسازی راه
  13. Effect of Adding Nano-Sio2 Particles and Silica Fume on the Physical Parameters of Soil-Cement Materials
  14. پیشنهاد نظریه چارلز-واتز برای مدل رفتاری خاک-سیمان-نانوسیلیس
  15. تاثیر الیاف متفاوت بر طاقت خمشی مصالح خاک-سیمان-الیاف
سایر مقالات محل انتشار
  1. اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
  2. بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
  3. Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
  4. Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
  5. Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
  6. Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
  7. Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
  8. Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
  9. Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
  10. Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
  11. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  12. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  13. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
  14. Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
  15. Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO