جستجو
Simulation, Investigation and analysis of Hydro-Forming Process For 90 Degree Bent Pipes Using Finite Element ABAQUS Software.
AMIR HOSSEIN FARDAD FAR1
Abstract :
The Hydroforming is a practice to expand, shape and bend a raw piece using fluid pressure. During this process, many changes are made at different points along the length of the piece. In most cases, due to such a unique feature, a hydroformed part is able to replace several pressing operations. In addition, drilling and grooving operations can be performed with minimal deformation of the part surface by means of hydroforming. It means that two different operations, each of which requires its own device in the manufacturing process, can be performed with one device in the hydroforming process. In the article, 314 steel pipe will be used for simulation and analysis. In this research, the hydroforming process of the pipe inside a 90-degree bend mold will be simulated in three dimensions with the help of finite element method and the improvement mechanism of forming will be analyzed and investigated. This simulation is done for a thickness of 1 mm. In the following, he examined and determined the optimal parameters in order to form the sheet without tearing and breaking, and carried out this process for a wide range of sheets in different thicknesses, and for the results of the simulation, he only examined things such as stresses, We will pay the strains, displacement and the amount of forces necessary to carry out the process.
Keywords : hydro forming finite element abaqus software simulation
زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HDBDC
لینک مستقیم مقاله : https://isnac.ir/XEHE-HDBDC
نمایش چکیده فارسی
: https://isnac.ir/SA/XEHE-HDBDC
سایر مقالات ارائه دهنده
- Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
- Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
- Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
- Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
- Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
- Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
- Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
- The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
- Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
- Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
- Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
- Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
- Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
- Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
- The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
- اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
- بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
- Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
- Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
- Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
- Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
- Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
- Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
- Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
- Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
- Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
- Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
- The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
- Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
- Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO