جستجو
Finite Element and Investigation of Stress on 7075 Aluminum Pipe Using Hydro-Forming Process
AMIR HOSSEIN FARDAD FAR1
Abstract :
The Hydroforming is a forming method in which, instead of hard metal, a high-pressure fluid is used to apply the forming force to the workpiece. Hydroforming is divided into two general categories: hydroforming of metal sheets and hydroforming of hollow parts. In both categories, a hydroforming mold, a press to keep the mold closed during forming, and a fluid pressure boosting system are needed. The high-pressure fluid, like a precise mandrel, presses the metal under forming to the wall of the mold and prevents the formation of wrinkles in the part. Also, by pressing the workpiece against the wall of the mold, the fluid increases the tension and as a result changes the shape of the wax. This wax-like strain reduces the spring return of the molded part after exiting the mold.
Keywords : hydro forming finite element abaqus software simulation
زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HDBDD
لینک مستقیم مقاله : https://isnac.ir/XEHE-HDBDD
نمایش چکیده فارسی
: https://isnac.ir/SA/XEHE-HDBDD
سایر مقالات ارائه دهنده
- Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
- Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
- Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
- Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
- Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
- Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
- Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
- The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
- Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
- Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
- Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
- Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
- Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
- Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
- The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
- اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
- بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
- Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
- Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
- Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
- Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
- Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
- Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
- Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
- Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
- Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
- Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
- The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
- Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
- Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO