Investigation of cracking in concrete dams

مسعود لک زاده1 میثم منظری توکلی2 سجاد محمد علی پور3

چکیده :
Abstract Usually, after an earthquake, cracks are observed in the body of concrete dams, and despite considering the necessary measures in the design of the dam body, due to the tensile forces caused by the earthquake, cracks occur in the concrete. If these cracks are not properly controlled, they will destroy the dam body. In this research, the method of crack formation and the effective factors in its formation, the method of crack propagation, the classification of the types of cracks created in the body of concrete dams, and the strategies for preventing or repairing the cracks created in the body of concrete dams have been investigated. Key words: cracking, concrete dam, thermal cracks.
کلمات کلیدی : Key words: cracking, concrete dam, thermal cracks.


زبان مقاله : فارسی
محور مقاله : مهندسی عمران
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
ارسال کننده : مسعود لک زاده
کد IOI مقاله : XEHE-HFEZF
لینک مستقیم مقاله : https://isnac.ir/XEHE-HFEZF

مقالات مشابه
  1. ارزیابی رفتار دینامیکی سد بتنی دوقوسی تحت زلزله های شدید
  2. مقایسه عددی و آزمایشگاهی سازه ای پایه های بتنی به کار رفته در خطوط توزیع برق
  3. مطالعه تحلیلی آزمایش break-off بر روی بتن
  4. بررسي پايداري زلزله اي سد كوينا قبل و بعد از افزايش ارتفاع
  5. Effect of Stress Paths on the Input Parameters of the Concrete Damage Plasticity Model
  6. Effect of Element Type of Reinforcement on Failure Performance of Four-point Bending beam
  7. ارائه مدل عددی جهت تحلیل اجزای محدود اتصال داخلی تیر به ستون بتن مسلح در معرض زوال برشی هسته اتصال
  8. بررسی اثر نحوه چیدمان الیاف CFRP بر سطح دال بتن مسلح تحت بارگذاری انفجار
  9. اثر استفاده از دوده سیلیسی بر روی ترک خوردگی حرارتی ناشی از گیرداری داخلی در بتن های حجیم سازه ای
  10. تحلیل فرکانسی و ارزیابی حساسیت قابلیت اعتماد سد بتنی وزنی بر اساس معیار پایداری لغزش
  11. مدل سازی خوردگی در سازه های بتنی غیرمسلح بوسیله آنالیز(FEM) یک سد بتنی غیرمسلح
  12. مدل سازی عددی برج طغرل با استفاده از روش اجزاء محدود غیر خطی
  13. تحلیل اثرات انواع پوزولان ها بر بتن سدها
  14. تحلیل ترک خوردگی حرارتی در سد کارون 4 در خوزستان
  15. Cracking development prediction in concrete gravity dams considering the effect of reservoir and foundation
سایر مقالات ارائه دهنده
  1. مدیریت بحران و آسیب‌شناسی ساختمان‌های خسارت‌دیده در اثر زلزله بم
  2. بررسی تأثیر میکروسیلیس بر کاهش نفوذپذیری و جذب آب بتن
  3. بررسی خواص الیاف و آنالیز آماری خصوصیات مکانیکی بتن¬های الیافی
  4. بررسی شکل‌پذیری تیرهای خمشی ساخته‌شده با بتن HSC
  5. تاثیرات آب مغناطیسی بر روی برخی از خواص مکانیکی بتن های معمولی و پر مقاومت
  6. افزایش دوام بتن در محیط های اسیدی و سولفاتی با استفاده از مصالح آهکی
  7. بررسی رفتار هیدروالاستیک سازه های شناور دریایی چند جزئی و پیوسته در برابر امواج
  8. Retrofitting concrete slabs using FRP composite fibers
  9. Investigating magnetic water usage in Concrete structure
  10. Crisis management and pathology of buildings damaged due to Bam earthquake
  11. مقاوم سازی مقاطع خمشی و آنالیز ترک خوردگی تیرهای بتن مسلح تقویت شده با استفاده از فیبرهای کامپوزیتی
  12. معرفی و بررسی خواص بتن های پلیمری
  13. بررسی شیوه های مقاوم‌سازی مخازن بتنی آب شرب در راستای پدافند غیرعامل
  14. بررسی تاثیر استفاده از معماری نور در ساختمان های شهری و اثرات روان شناختی آن بر روی شهروندان
  15. مطالعه تأثیر استفاده از پوزولان های طبیعی بر روی خصوصیات مکانیکی بتن های غلتکی
سایر مقالات محل انتشار
  1. اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
  2. بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
  3. Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
  4. Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
  5. Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
  6. Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
  7. Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
  8. Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
  9. Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
  10. Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
  11. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  12. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  13. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
  14. Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
  15. Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO