جستجو
A Review of Polyacrylonitrile-Based Ultrafiltration Membranes for Water Treatment: Fabrication, Modification, and Antifouling Approaches
Ghazaleh Jafariderazkolaei1 MOHSEN TAGHAVIJELOUDAR2
Abstract :
Membrane-based separation has emerged as an efficient approach for water and wastewater treatment owing to its compact configuration, high separation efficiency, and relatively low energy requirements. Among polymeric membrane materials, polyacrylonitrile (PAN) has attracted considerable attention because of its favorable chemical and mechanical stability, membrane-forming capability, and suitability for diverse fabrication and surface-modification strategies. However, the intrinsic characteristics of PAN membranes, including limited surface functionality and susceptibility to fouling, can restrict their permeability, selectivity, and long-term separation performance. This review critically examines recent advances in PAN-based ultrafiltration membranes for water and wastewater treatment, with particular emphasis on membrane fabrication, structural and surface modification, and the resulting changes in transport and antifouling properties. The effects of fabrication parameters, including polymer concentration, phase-inversion conditions, pore structure, porosity, and membrane thickness, are discussed in relation to water permeability and solute rejection. In addition, chemical and physical modification strategies, including alkaline hydrolysis, polymer grafting, surface coating, blending, and nanomaterial incorporation, are evaluated based on their mechanisms and performance improvements. Particular attention is given to the interrelationships among membrane morphology, surface hydrophilicity, surface charge, permeability, rejection, and fouling behavior. Finally, current challenges concerning permeability–selectivity trade-offs, modification stability, reproducibility, and scale-up are identified, and future research directions toward high-performance, antifouling, and sustainably fabricated PAN membranes are proposed.
Keywords : polyacrylonitrile ultrafiltration membrane modification water treatment antifouling phase inversion
زبان مقاله : انگلیسی
محور مقاله : یازدهمین کنفرانس پژوهش در علوم و مهندسی / علوم مهندسی
محل انتشار : یازدهمین کنفرانس بین المللی پژوهش در علوم و مهندسی و هشتمین کنگره بین المللی عمران، معماری و شهرسازی آسیا
آدرس وب سایت کنفرانس : 11icrsie.ir
کد IOI مقاله : ABGG-ACZEKZ
لینک مستقیم مقاله : https://isnac.ir/ABGG-ACZEKZ
سایر مقالات ارائه دهنده
- امکان سنجی استفاده از آب باران به عنوان یک منبع آب تجدید پذیر با استفاده از نقشه های هوایی Google Earth و داده های هواشناسی (مطالعه موردی: شهر تهران)
- Municipal wastewater treatment through cultivation of a new strain of microalgae Chlorella sorokiniana pa.91 in flat plate photobioreactor (FP-PBR
- Qanat, a sustainable and environmentally friendly system for water resource management in arid area
- A novel approach for extraction of high value bio-products from microalgae using surfactants
- An investigation on the potential of rainwater harvesting from building’s roof tops in Seoul city, South Korea
- Performance evaluation of membrane bioreactor (MBR) for pulp and paper wastewater treatment
- Using Ferric chloride (FeCl3) as trace-element to enhance methane production of anaerobic co-digestion
- Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
- The therapeutical potency of cyanobacterial secondary metabolites compared with chemotherapy against leukemia: Mini-review
- Optimization of 4-chlorophenol degradation through ozonation process: Response Surface Methodology (RSM)
- A sustainable and environmentally friendly approach for wastewater treatment using natural flocculants: pH effect and optimization
- Smart design of a sustainable building with zero water demand: Rainwater harvesting, in situ water and wastewater treatment
- Improvement of microalgal-based biological treatment of municipal wastewater by adding ZnCl2 and FeCl2 as trace elements
- Sustainable approach for wastewater treatment through microbial fuel cell (MFC): Using wood glue instead of expensive polymeric binders
- Optimization of high-value bio-product extraction from microalgae biomass: Effect of temperature and light intensity
سایر مقالات محل انتشار
- بررسی علل گوشهگیری دانشآموزان در برنامه صبحگاهی و ارائه راهکارهای مناسب جهت بر طرف کردن آن
- توسعه مدل ریاضی یکپارچه زمانبندی چندپروژهای تحت محدودیت منابع تجدیدپذیر و مصرفی در صنایع پروژهمحور (مطالعه موردی: صنعت پتروشیمی)
- The Urban-Agriculture Nexus: Environmental Challenges and Sustainable Prospects in the Bangkok Metropolitan Region
- نقش سرمایه اجتماعی و مشارکتهای مردمی در ارتقای تاب آوری و پاسخگویی نظام مدیریت بحران طبیعی در ایران
- الگوی طراحی مجتمع فرهنگی-آموزشی کودکان با رویکرد طبیعتمحور بهمنظور ارتقاء تابآوری کودکان
- طراحی و توسعه نانوواکسنها: پلتفرمها، سازوکارهای ایمنیشناختی و کاربردهای درمانی در بیماریهای عفونی، سرطان و رویکردهای القای تحمل ایمنی
- تاثیر موقعیت قرارگیری مهاربند دارای میراگراصطکاکی دورانی در صفحه قاب بر عملکرد قاب فولادی
- بررسی تأثیر الگوهای معماری نرمافزار بر کیفیت پروژههای توسعه وب مطالعه تطبیقی MVC، MVVM، Clean Architecture
- Beyond the Cartesian Divide: A Genealogy of Architectural Autonomy Toward Hybrid Ontologies
- تحلیل گفتمان تحولگرای برنامهریزی شهری در عصر شهرهای خلاق: از روایتهای حکمرانی تا تجربیات زیسته در بستر چندفرهنگی
- معماری در زمان و معماری بر زمان
- The impact of Asian culture on color choice in digital user interface design
- Physics-Informed Lightweight Federated Learning with Explainability for Privacy-Preserving Predictive Maintenance of PMSM Drives: A Simulation Study
- تبیین اصول طراحی محیطهای درمانگر از طریق بازخوانی مجموعۀ اسکلپیون اپیداوروس: رویکردی از منظر روانشناسی محیطی
- مروری بر پژوهش های چارچوب یکپارچه بلاکچین، دوقلوی دیجیتال و مدلسازی اطلاعات ساختمان در صنعت ساخت 4.0